| Author |
Topic: ** |
Tommy Cass
From:
Baldwinville, Ma. U.S.A.
|
Posted 4 Feb 2024 11:47 am |
|
**
Last edited by Tommy Cass on 28 Sep 2024 2:29 am; edited 1 time in total |
|
|
 |
Jeff Highland
From:
New South Wales, Australia
|
Posted 4 Feb 2024 2:02 pm
|
|
I don't have a diagram but that would be pretty simple.
Looking from the rear of the pots
Volumes ccw lug to earth on back of pot, cw lug hot from pickup ground from pu to back of pot, centre lug to switch input switch outputs to ccw lug on tone pot, then to centre terminal on jack.
Tone pot centre lug capacitor to ground on back of pot try .047
Ground wire back of all pots to ground tab on jack
cw clockwise
ccw counterclockwise
_________________
Duesenberg Fairytale
1949 Supro Supreme
1950 National New Yorker
2008 Highland Baritone Weissenborn
2020 Highland New Yorker.
2020 Highland Mohan Veena
2021 Highland Weissencone |
|
|
|
Rick Aiello
From:
Berryville, VA USA
|
Posted 4 Feb 2024 3:20 pm
|
|
I don't have a double neck on here ... but these are the various wiring schemes that Rickenbacher employed over the years ...
https://www.horseshoemagnets.net/home/rickenbacher/wiring-schemes
They used a two lug "rheostat" configuration that acts as a varying load on the coil ... works great with the volume only models ... roll off the volume and the tone darkens ... kinda overkill with a tone ...
Most folks opt for the "Modern" wiring that I put at the bottom for comparison ... no interaction between vol and tone |
|
|
|
Tommy Cass
From:
Baldwinville, Ma. U.S.A.
|
Posted 5 Feb 2024 4:30 am Got it
|
|
Got it
Last edited by Tommy Cass on 28 Sep 2024 2:29 am; edited 1 time in total |
|
|
|
Rick Aiello
From:
Berryville, VA USA
|
Posted 5 Feb 2024 7:29 am
|
|
| The "hots" from the middle lug of both volume pots ... to the switch. |
|
|
|
