Author |
Topic: Help needed for carter |
Paul Higgins
From: United Kingdom
|
Posted 19 Jan 2024 2:44 pm
|
|
Hi can someone help me for Carter ( im not sure what type is it) I have not got the origin copedant if anyone had a copy
3 pedals 5 leg leaver's Im having trouble with seting it up...The pedals are not correct..the left knew leaver's correct..the right knee leaver Im having trouble with Ill try and explain....Right knee leaver going to the left gives me *1 string F# going to +G with the leavers going to the left....the same leaver going to the right has 2 stops and Im not sure what they do
Hoping some one can help
RdGs Paul |
|
|
|
Jerry Overstreet
From: Louisville Ky
|
Posted 19 Jan 2024 3:08 pm
|
|
Try this chart here. This is from the old Carter website that has been maintained here after they closed up. There's a lot of other good stuff on these pages. Good luck.
https://steelguitar.com/rodding.html |
|
|
|
Tucker Jackson
From: Portland, Oregon, USA
|
Posted 19 Jan 2024 8:31 pm
|
|
What you described is pretty close to what came from the Carter factory (except string 1 goes to G# instead of G... maybe you can just turn the nylon tuning nut to get it to G#?).
From the same site Jerry gave you is this page:
https://steelguitar.com/sampleS10Tuning.html
Good luck. |
|
|
|
Bobby D. Jones
From: West Virginia, USA
|
Posted 19 Jan 2024 9:26 pm
|
|
Does the knee lever you describe having 2 stops in it, Is it hooked to the 2nd string, Are on some guitars set up, 2nd string open D#, First stop lower D, Second stop lower to C#. |
|
|
|
Paul Higgins
From: United Kingdom
|
Posted 21 Jan 2024 3:23 pm
|
|
Hi Thank you all Bobby and Jerry and Tucker for all you help
Yes it dose have 2 stops on the knee leaver's
I think Ive done it now hear's hoping
Any Idea what the furfest tuner on the left ( looking at it ) its a tuner on it oun....what is it for ?
Thank you Paul |
|
|
|
Jon Light
From: Saugerties, NY
|
Posted 21 Jan 2024 3:44 pm
|
|
Paul Higgins wrote: |
Any Idea what the furfest tuner on the left ( looking at it ) its a tuner on it oun....what is it for ?
Thank you Paul |
|
|
|
|
Paul Higgins
From: United Kingdom
|
Posted 22 Jan 2024 9:52 am
|
|
Thank you Jon |
|
|
|
Howard Parker
From: Maryland
|
Posted 23 Jan 2024 7:43 am
|
|
Here is the Complete Carters Owners Manual.
Should answer many of your questions.
hp _________________ Howard Parker
03\' Carter D-10
70\'s Dekley D-10
52\' Fender Custom
Many guitars by Paul Beard
Listowner Resoguit-L |
|
|
|
Paul Higgins
From: United Kingdom
|
Posted 23 Jan 2024 9:08 am
|
|
HI Thank you Howard I have saved it Ill print it out
Thank you Paul |
|
|
|
Paul Higgins
From: United Kingdom
|
Posted 23 Jan 2024 5:19 pm
|
|
Jon Light wrote: |
Paul Higgins wrote: |
Any Idea what the furfest tuner on the left ( looking at it ) its a tuner on it oun....what is it for ?
Thank you Paul |
|
Hi Jon...Just checking if Im doing it right
So what I do is tuning the 2nd string Eb to D on the main tuning peg.. and ajust ( the tuning peg we where taking about the peg thats on it own) to C#..am I doing it right??
For some reason I dident see your stickey post I have read through some of them..It is a good
Thank you for your help
Paul |
|
|
|
Jon Light
From: Saugerties, NY
|
Posted 23 Jan 2024 5:32 pm
|
|
I was starting to write instructions but I realized that I can't do better than the instructions from the Carter manual in the graphic. Tune the 2nd string lower to C# on the finger circled in red. Then adjust the half stop tuner so that it engages when you hear the D note. It is a feel stop.
|
|
|
|
Paul Higgins
From: United Kingdom
|
Posted 24 Jan 2024 2:25 pm
|
|
Thank you Jon..It is in tune now
An explaition..I changed my pedals from the right to the left foot injury
when I changed them back I was surprised to know how the knee leaver's where changed..I just don't know.. Thank you for you help
Paul |
|
|
|
Paul Higgins
From: United Kingdom
|
Posted 26 Jan 2024 5:31 pm
|
|
Paul Higgins wrote: |
Thank you Jon..It is in tune now
An explaition..I changed my pedals from the right to the left foot injury
when I changed them back I was surprised to know how the knee leaver's where changed..I just don't know.. Thank you for you help
Paul |
Hi Jon...Im I reading this right....if I wanted to have my pedals smother ( I mean I havent got to put put much force in to pressing the pedals down ) I would put the rod higher up on the bell shank.? ( my foot dosent work like it used to) that why I changed it around in the first place...I supposed ill get used to useing it
while Im posting if you wouldent mind an other question
The holes in the changer would it make a defiance what hole I put the rod in..Thank you for all your help so far
Paul |
|
|
|
Jon Light
From: Saugerties, NY
|
Posted 26 Jan 2024 6:02 pm
|
|
|
|
|
|
Paul Higgins
From: United Kingdom
|
Posted 27 Jan 2024 11:22 am
|
|
Hi Jon... your drawing's are fantistic
that explains a lot of things..Its the other way round from what I was thinking it was so helpfull
All I need now is to find some 3/32 stainless steel and
it like looking for rocking hose pop in the UK to get it back to how it was..the nearest I can get is 2mm and it a hassel geting the nylon tuning to fit..and welding rod the nearest is 2.4mm...I used the 2mm for now
Its been a great help with you drawing's Thank you for sparing you time
Paul |
|
|
|