| Author |
Topic: Custom Tonebar Needed.SP1, but different. |
Ray McCulloch
From:
Missouri, USA
|
Posted 9 Jan 2024 1:11 pm |
|
| Howdy Friends. I Love the speed and feel of my Shubb SP1, but my more traditional round bars intonate much better on my pedal steel, specifically my 7/8" bar. I attribute this to the tighter radius on the round bars, (less surface contact with the strings) So what I would love to have is an SP1 with a tighter radius on the playing surface. Anyone making custom orders open to trying to make one? Or is this already in production somewhere? |
|
|
 |
Pete Burak
From:
Portland, OR USA
|
Posted 9 Jan 2024 2:24 pm
|
|
Did you try the Robert Randolph model yet?
It is thinner and longer than the SP1.
Presumably for Pedal Steel ala RR. |
|
|
|
Ray McCulloch
From:
Missouri, USA
|
Posted 9 Jan 2024 3:59 pm
|
|
| Pete Burak wrote: |
Did you try the Robert Randolph model yet?
It is thinner and longer than the SP1.
Presumably for Pedal Steel ala RR. |
That is a very good suggestion. I have tried it and I think I would really dig it IF it had the same chisel style tip that the SP1 has. Maybe the RR1 can be modified? |
|
|
|
Pete Burak
From:
Portland, OR USA
|
Posted 9 Jan 2024 4:04 pm
|
|
| Ray McCulloch wrote: |
| Pete Burak wrote: |
Did you try the Robert Randolph model yet?
It is thinner and longer than the SP1.
Presumably for Pedal Steel ala RR. |
That is a very good suggestion. I have tried it and I think I would really dig it IF it had the same chisel style tip that the SP1 has. Maybe the RR1 can be modified? |
I would bring them both to a metal shop and ask the person to make this one, like this one.
Looks like a very quick job on a grinding wheel.
You could also call Shubb and ask them to do it. |
|
|
|
Norman Evans
From:
Tennessee
|
Posted 10 Jan 2024 7:02 am
|
|
I modified this RR1 in about an hour. I should say also that I worked as a machinist for about 40 years, so it was an easy job for me.
 |
|
|
|
Ray McCulloch
From:
Missouri, USA
|
Posted 11 Jan 2024 7:09 am
|
|
| Norman Evans wrote: |
I modified this RR1 in about an hour. I should say also that I worked as a machinist for about 40 years, so it was an easy job for me.
|
That looks like a very good solution. Thanks a bunch for your input. Can you tell me a little bit about your process there? I am no pro machinist but i have a bench grinder and a buffing wheel. |
|
|
|
Lee Rider
From:
Fort Bragg, California, USA
|
Posted 1 Apr 2024 9:23 am
|
|
I've had a bunch of damage done to my left hand including broken pinky, double compound dislocation at the 5th metacarpal and also dislocating the middle finger, so holding on to a round bar is tough. I had a machinist friend modify my 7/8" stainless steel bar to make it easier to hold. Works great but a tad light so he is making me one out of 1.25" stock.
_________________
Bowman SD10 push pull 3x5, Modified Hudson PedalBro, Sarno Tonic preamp, Evans FET 500. with Altec 418B, Standel Custom 15, '67 Showman with D-130F in cabinet, Ganz Straight Ahead, custom Wolfe 6 string dobro, '52 Gibson Century 6. |
|
|
|
