Overturning/ under turning

Shane Scoggins · From: Alabama, USA

I have read the post about overturning… this is exactly what I have done to both of my guitars. I I live in whitley City KY … could anyone recommend to me the closet person who could help me …. With this problem.
Shane Scoggins.
Thanks

John Hyland · From: South Australia

This isn’t the right place to ask this question but depending on you guitar back off the nylon pedal tuning nuts until they are clear of the finger. Tune the open string then retune the pedal with the nylon nut. You will need to check this doesn’t change the open tuning. If it does then you will need to either increase the pedal travel or move the rod to a hole closer to the axle or move the rod at the bellcrank toward the end of the bellcrank.

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: