| Author |
Topic: ZB PSG Bridge Parts |
Tony Oresteen
From:
Georgia, USA
|
Posted 17 Dec 2023 10:40 pm |
|
I have a ZB PSG 10 string bridge and I need the rollers that the strings lie on. Anyone know of a source for ZB parts? I was able to make the axel for it.
Also, what is the diameter of the rollers?
Thanks!
_________________
Tony
Newnan, GA
Too many guitars, not enough time to play
'72 Sho-Bud 6139, '71 Marlen 210
'78 Fender Stringmaster Quad black
PedalMaster D8 |
|
|
 |
Eric Dahlhoff
From:
Point Arena, California
|
|
|
|
Tony Oresteen
From:
Georgia, USA
|
Posted 18 Dec 2023 10:01 pm
|
|
Thanks!
I have a nut/head piece. From photos I have seen there are pieces that go on the bridge axel that the strings rest on. Thinking about it, it has to be the changer fingers, Duh!
I am making a 10 string practice board/lap steel so I need to put something there to guide the strings.
_________________
Tony
Newnan, GA
Too many guitars, not enough time to play
'72 Sho-Bud 6139, '71 Marlen 210
'78 Fender Stringmaster Quad black
PedalMaster D8 |
|
|
|
Eric Dahlhoff
From:
Point Arena, California
|
Posted 19 Dec 2023 8:49 am ZB bridge
|
|
ZB's have removable tops on the fingers. That would be way over-kill for your need. I would suggest something like the bridge on a Fender Stringmaster.
_________________
"To live outside the law you must be honest." (Bob Dylan) |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 19 Dec 2023 10:06 am Re: ZB bridge
|
|
| Eric Dahlhoff wrote: |
| ZB's have removable tops on the fingers. That would be way over-kill for your need. I would suggest something like the bridge on a Fender Stringmaster. |
For sure. Plus, the practice board would have to be deep enough to house the changer fingers. Totally un-necessary overkill.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 55 years and still counting. |
|
|
|
