| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Power Amp for Pedal Steel
Reply to topic
Author Topic:  Power Amp for Pedal Steel
Justin Shaw

 

From:
Ontario, Canada
Post  Posted 10 Nov 2023 11:45 am    
Reply with quote

I've been looking at getting Brad Sarno's Revelation Preamp. Does anyone have good suggestions for which power amp to use with it? Does it matter?
View user's profile Send private message Send e-mail
Dennis Detweiler


From:
Solon, Iowa, US
Post  Posted 10 Nov 2023 5:03 pm    
Reply with quote

I use the Crown XLS 1002. Class D stereo/mono. Excellent fit.
_________________
1976 Birdseye U-12 MSA with Telonics 427 pickup, 1975 Birdseye U-12 MSA with Telonics X-12 pickup, Revelation preamp, Carbon Copy Delay and Hall Of Fame Reverb, Crown XLS 1002, 2- 15" Eminence Wheelhouse speakers, ShoBud Pedal, Effects Pedals. 1949 Epiphone D-8.
View user's profile Send private message Send e-mail
Bob Hoffnar


From:
Austin, Tx
Post  Posted 10 Nov 2023 5:12 pm    
Reply with quote

Power amps do matter quite a bit. I've been very happy with my Fryette Power Station. It does a bunch of stuff but mainly I use it as a power amp and it is glorious sounding with my Sarno spectrum pre amp. There are some great really small and light class D power amps out there too if you don't want to deal with tubes.
_________________
Bob
View user's profile Send private message Send e-mail Visit poster's website
Justin Shaw

 

From:
Ontario, Canada
Post  Posted 10 Nov 2023 9:46 pm    
Reply with quote

OK cool good suggestions. I've read somewhere that dedicated power amps sound a bit better than the power station, but I guess those wouldn't have all the other stuff like effects loops, attenuation, XLR outs, etc.

I guess if you go with a Fryette 2/90/2 or something you're basically just buying a tube amp in two pieces, and then you'll need to mic it, etc just like you normally would.
View user's profile Send private message Send e-mail
Michael Hartz

 

From:
Decorah, Iowa, USA
Post  Posted 11 Nov 2023 10:43 am    
Reply with quote

With mine I used a 1 rack space Stewart World 1.2 power amp. Sounded amazing.
View user's profile Send private message Send e-mail Visit poster's website
Dave Diehl

 

From:
Mechanicsville, MD, USA
Post  Posted 11 Nov 2023 2:37 pm    
Reply with quote

The Fryette is a good option but I've found that the Revelation sounds best with the Furlong Powered Cabs (CB12's I believe is the correct name). They are no longer made but you can find them occasionally here on the Forum.
View user's profile Send private message Send e-mail
Bob Hoffnar


From:
Austin, Tx
Post  Posted 12 Nov 2023 4:14 am    
Reply with quote

Justin Shaw wrote:
OK cool good suggestions. I've read somewhere that dedicated power amps sound a bit better than the power station, but I guess those wouldn't have all the other stuff like effects loops, attenuation, XLR outs, etc.

I guess if you go with a Fryette 2/90/2 or something you're basically just buying a tube amp in two pieces, and then you'll need to mic it, etc just like you normally would.


I have owned and used both the 2/90/2 and the power station. They both sound absolutely heavenly. The sonic quality is up there with Macintosh for both of them.

You will not need to mic the fryette stuff. They are as loud as anything mentioned so far. Unless you are in a position where something like a twin or Nash 400 wouldn’t be loud enough. The Power Station is about half the power of the 2/90/2 but it is still plenty loud. The 2/90/2 is a total beast !

The suggestions for power amps are all really good so far. I would base my choice on practical application.

The revelation is about as good as it gets for pre amps. Most any power amp will sound pretty good with one but they are different sounding.
_________________
Bob
View user's profile Send private message Send e-mail Visit poster's website
Dale Rottacker


From:
Walla Walla Washington, USA
Post  Posted 12 Nov 2023 6:28 am     Re: Power Amp for Pedal Steel
Reply with quote

Justin Shaw wrote:
I've been looking at getting Brad Sarno's Revelation Preamp. Does anyone have good suggestions for which power amp to use with it? Does it matter?

Justin when I had a Revelation, like Dennis, I matched it up with the Crown XLS 1002. It was an excellent fit with TONS of power, and if I remember correctly it was Brad who made this suggestion to me.
_________________
Dale Rottacker, Steelinatune™
https://www.youtube.com/@steelinatune
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com
View user's profile Send private message Send e-mail Visit poster's website
Preston Williams


From:
So. Illinois
Post  Posted 12 Nov 2023 8:04 am    
Reply with quote

I am having really good results using a mosvalve 500 with my Revalation and tc m one xl !! The only downside is its 2 rack spaces and it adds quite a bit of weight to the rack!
_________________
Emmons D10 8x9 Fessenden sd10
Hilton,Steeler choice George L
Peavey Tc electronics, Sarno electronics!
View user's profile Send private message Send e-mail
Ken Morgan

 

From:
Midland, Texas, USA
Post  Posted 12 Nov 2023 8:18 am    
Reply with quote

Jay Ganz Straight Ahead features 500 watts, immaculate sound, weighs nothing, and takes up very little space
_________________
67 Shobud Blue Darling III, scads of pedals and such, more 6 strings than I got room for

Ken Morgan
Midland, TX
View user's profile Send private message Send e-mail Visit poster's website
Steve Lipsey


From:
Portland, Oregon, USA
Post  Posted 12 Nov 2023 11:17 am    
Reply with quote

The only right answer is a McIntosh MC2300....
https://www.mcintoshlabs.com/brand/news/Grateful-Dead-Budman-McIntosh-MC2300-amplifier-sells-for-six-figures-at-Sothebys-auction
...Other 2300s available for MUCH less money on the used market nowadays, and reviews still say they sound amazing even when stacked up against modern gear...
...and, as indisputable proof, IT'S WHAT JERRY USED!!!!
_________________
https://www.lostsailorspdx.com
Williams S10s, Milkman Pedal Steel Mini & "The Amp"
Ben Bonham Resos, 1954 Oahu Diana, 1936 Oahu Parlor
View user's profile Send private message Send e-mail Visit poster's website
Brad Sarno


From:
St. Louis, MO USA
Post  Posted 12 Nov 2023 11:36 am    
Reply with quote

Jerry's "Budman"!!!

128 lbs of beastly McIntosh power!!
View user's profile Send private message Send e-mail Visit poster's website
Justin Shaw

 

From:
Ontario, Canada
Post  Posted 12 Nov 2023 11:44 am    
Reply with quote

Wow thanks for all the replies!

I think for all the options it provides I'll start with the Power Station. It has the effects loop, attenuation, and xlr and 1/4" outs for recording and FoH.

Thank you for these other options I'll put them on the list! It would be great to have a preamp and light Class D power amp combo ready too.

Thanks again!
View user's profile Send private message Send e-mail
Ron Funk

 

From:
Ballwin, Missouri
Post  Posted 12 Nov 2023 12:04 pm    
Reply with quote

As Dave Diehl mentioned above, the self powered Class D Furlong SPLITs cabinets are the cat's meow.
View user's profile Send private message Send e-mail
Justin Shaw

 

From:
Ontario, Canada
Post  Posted 12 Nov 2023 12:49 pm    
Reply with quote

That's a good solution too, I just already have a cab I really like. That would be a very compact gear set though: preamp, reverb pedal and cab! I'll keep an eye out for a Furlong for sure.
View user's profile Send private message Send e-mail
Alex Cattaneo


From:
Quebec, Canada
Post  Posted 16 Nov 2023 8:20 pm    
Reply with quote

Anyone try the Seymour Duncan Power Stage? They have several models available now.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron