Author |
Topic: Need Push Pull Maintenance Guide |
Austin Starkey
From: Austin Texas, USA
|
Posted 13 Jun 2023 5:15 am
|
|
Is there any available Push Pull maintenance guide out there? Book, PDF, blog, forum thread, stone tablet?
I have a non-Emmons Push Pull that needs to be stripped down, have the changer cleaned, some parts gone through, small copedent changes, etc.
I haven't worked on an Emmons, or any other Push Pull before, but have done some All Pull work with success, after some guidance. I feel confident I can get through it, but would prefer some sort of instruction or guide if any is available. I know it will most likely be for an Emmons, but that is ok.
Open to suggestions, but trying to get this work done without sending it out if possible. |
|
|
|
Jack Hanson
From: San Luis Valley, USA
|
Posted 13 Jun 2023 5:59 am
|
|
There is the booklet and a series of videos from Clem Schmitz:
Available on eBay and directly from Clem. |
|
|
|
Mike Polansky
From: Austin, TX
|
|
|
|
Mike Vallandigham
From: Martinez, CA
|
Posted 13 Jun 2023 8:06 pm
|
|
Good job guys.
Those are the two I'd recommend, and I'm not sure if I can think of any others. |
|
|
|
Dave Magram
From: San Jose, California, USA
|
Posted 13 Jun 2023 10:41 pm
|
|
There are some good tips in the “sticky” thread above: Guide to tuning an Emmons Push/Pull
https://bb.steelguitarforum.com/viewtopic.php?t=205028
******************************************************
I'd highly recommend Clem Schmitz's bargain-priced booklet "Methodology And Practice In Pedal Steel Guitar" to any Emmons push-pull owner. Clem used to own a steel guitar store and repair shop in Minneapolis, then one in Nashville, where he worked on Emmons push-pulls owned by players such as Mike Johnson.
The 24-page booklet shows how to make simple adjustments to an Emmons push-pull or even take the entire guitar apart and put it back together.
In his booklet, Clem explains step by step (with photos) exactly how to disassemble, re-assemble, and adjust push-pull guitars with several clever little tricks that would take a very long time to figure out--including a simple solution to setting the correct amount of slack on the 4th string in 5 seconds or less! (Just that tip alone is worth the bargain price of Clem's booklet & DVD!)
He sells the booklet and a DVD combo package on eBay listed as "Pedal Steel Guitar 83 METHODOLOGY P/P Book & 2008 2 DVD's Package" for just $21!
Highly recommended!
https://www.ebay.com/itm/274497649883?hash=item3fe955bcdb:g:BvkAAMXQMmJROe-R
If Clem's material is no longer on eBay, try contacting him at freedomsauce(at)comcast(dot)net (replace the "at" with "@", and "dot" with ".")
Emmons push-pull guitars are very reliable and stable and I almost never need Clem's booklet, but it's great to have for the rare time every 10 years or so when some little Allen screw loosens up somewhere, or a string pitch change isn't happening the way it should and you have to leave for a gig in the next 30 minutes.
Clem is a very helpful guy; I've heard that if you are really stuck, he will guide you through the fix via Skype for a very nominal fee.
- Dave |
|
|
|
Charlie Hansen
From: Halifax, NS Canada and Various Southern Towns.
|
Posted 14 Jun 2023 6:44 am
|
|
John Lacey has a guide that I believe I have a copy of. Send me a pm with your email address and I’ll send it when I find it. It should be this afternoon. _________________ I don't know much but what I know I know very well.
Carter S-10 3X5, Peavey Nashville 112, plus Regal dobro and too many other instruments to mention.
Bluegrass Island CFCY FM 95.1 Charlottetown, PE, Canada, on the web at cfcy.fm.
A Touch Of Texas CIOE FM 97.5 Sackville, NS, Canada,
on the web at cioe975.ca. |
|
|
|
John Sims
From: Ft. Lauderdale, FL
|
Posted 17 Jun 2023 4:11 am
|
|
Contact Micky Adams, I think he had a PP manual he created. _________________ Best Regards,
John
1997 Carter U-12 Double Body-Natural Birdseye Maple-8p/5k, Peavey Nashville 1000 Amp, Goodrich L10K Vol. Pedal, Boss DD-3 Delay, Boss CE-5 Chorus, Behringer UMC-204HD Audio Interface, AKAI MPK Mini MK3 Professional Midi Keyboard/Controller, Gretsch Bobtail Resonator, Fender Banjo, Rondo SX Lap Steel (C6), DIY Lap Steel (Open D), and a few Mojo Hand Cigar Box Guitars (MojoHandGuitars.com). |
|
|
|
Ron Funk
From: Ballwin, Missouri
|
|
|
|
memphislim
From: Austin, Texas
|
Posted 26 Jun 2023 6:42 am
|
|
Austin, if you get in over your head or just want to have a pro do it, give me a heads up. I'm local to you and have been doing push-pull, as well as all others for over 30 years.
Slim |
|
|
|