| Author |
Topic: Pedal rods falling off? |
Phillip Cryer
From:
Texas, USA
|
Posted 30 Dec 2021 4:41 pm |
|
I’m very new to this instrument, only been playing about a month so forgive me if this is a stupid question. Is it common to have the pedal rods fall off while playing? At least two or three times per practice session my foot will catch the pedal weird and lift it up high enough for the hook on the end of the rod to come loose and completely detach the pedal. Is it just my inexperience causing this or is there something I can do setup wise to fix it? I haven’t played any gigs yet but this would be a huge problem if it happened on stage. I’ve tried to include a picture in case my guitar setup isn’t standard.
Thanks |
|
|
 |
Jon Light
From:
Saugerties, NY
|
Posted 30 Dec 2021 4:50 pm
|
|
| I can't be 100% certain, looking at the photo, but it is NOT an uncommon mistake to hook it up from the wrong direction. You will need to angle the rod rather extremely to get it on but try hooking it in the reverse way from how you've got it. |
|
|
|
Jon Light
From:
Saugerties, NY
|
Posted 30 Dec 2021 4:58 pm
|
|
| On closer examination, I do believe that this is exactly the problem and that my suggestion is going to be the fix. It shouldn't give you any more trouble. |
|
|
|
Liam Sullins
From:
Brookville, Ohio
|
Posted 30 Dec 2021 4:59 pm
|
|
Yup, just flip the rod around. I had this problem starting out and I never figured it out until I sold my Bud, ha.
_________________
'66 Sho~Bud Fingertip, Sho~Bud amps, Fenders, old cars and Tinkerin with steels! |
|
|
|
Phillip Cryer
From:
Texas, USA
|
Posted 30 Dec 2021 7:28 pm
|
|
| Yep that’s what it was, I feel dumb. Thanks for the reply’s! |
|
|
|
Jon Light
From:
Saugerties, NY
|
Posted 31 Dec 2021 3:05 am
|
|
| Phillip Cryer wrote: |
| Yep that’s what it was, I feel dumb. Thanks for the reply’s! |
Not the first time someone has had this problem. It goes on easier the wrong way and it seems obvious that it is right. 'cept it isn't. |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 31 Dec 2021 5:35 am
|
|
| Phillip Cryer wrote: |
| Yep that’s what it was, I feel dumb. Thanks for the reply’s! |
Instead of feeling "dumb", feel a little better "informed" .
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|
Phil Geraldi
From:
California, USA
|
Posted 1 Nov 2022 5:00 pm
|
|
Hello everyone. Reviving this thread becasue I am experiencing the same issue. My rods are connected like in the original poster's photo, but there is no way for me to flip them around as I believe is being specified here- there's no room. Any ideas?
EDIT: I actually just figured it out. I was trying to flip the rod while it was still connected to the actual pedal. oof! |
|
|
|
Sean Jenkins
From:
Ohio, USA
|
Posted 9 Dec 2022 10:32 am
|
|
I played a GFI for years, and the hooks on the pull rods were long enough that you could attach from the front and it wouldn't pop out if you accidentally caught the bottom of a pedal.
When I got an Excel the hook was much shorter and I wondered why it was so easy to accidentally kick the rod out. Thought I was just clumsy. Turns out I had been hooking up the pull rods the wrong way for years, hehe. (And I'm still kinda clumsy).
Just wanted to let you know you're not the only one. 
_________________
GFI Ultra, Melbert 8 string, Goodrich, Volume Pedal, Fender Amps |
|
|
|
Dave Ellis
From:
Queensland, Australia
|
Posted 13 Jun 2023 3:42 am
|
|
3 weeks into playing and I had exactly the same issue. Thanks to the answers to this question,problem solved.
_________________
New Pedal Steel Guitar player in Australia.
Set up will be complete mid 2023.
* Show Pro SD-10 "The Lloyd Green"
* Hilton Volume Pedal
* Peterson HD Tuner
* Quilter Travis Toy 12" Amp
* Steel Seat- TBC |
|
|
|
