| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Changer finger
Reply to topic
Author Topic:  Changer finger
Steve Goodson

 

From:
South Carolina, USA
Post  Posted 16 May 2023 6:52 am    
Reply with quote

I have a Mullen with a pin missing on one of the changer fingers. Are those pins available or do I have to buy a new finger? Thanks
View user's profile Send private message Send e-mail
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 16 May 2023 7:11 am    
Reply with quote

I'd ask Mullen.
View user's profile Send private message Send e-mail
Wayne Brown


From:
Bassano, Alberta, Canada
Post  Posted 16 May 2023 7:26 am     steel guitar parts
Reply with quote

if it's the roll pins used to hold the ball end of the strings on. They should be a 1/16 roll pin and are readily available in an automotive parts place. The ones I have here are...
thanks
wayne
_________________
Owner Out West Music,Seats,Parts and accessories
www.outwestcountry.ca
View user's profile Send private message Send e-mail Visit poster's website
Steve Goodson

 

From:
South Carolina, USA
Post  Posted 16 May 2023 7:47 am     Changer finger
Reply with quote

I did talked to Mullen and they are checking to see if they have any. Sounds like the newer Mullens no longer use this system. May have to just get a new Mullen.
View user's profile Send private message Send e-mail
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 16 May 2023 8:06 am    
Reply with quote

Steve,
Sounds like a good deal, why mess with the small things. Whoa!
Erv
View user's profile Send private message Send e-mail
Bobby D. Jones

 

From:
West Virginia, USA
Post  Posted 18 May 2023 8:27 am    
Reply with quote

Removing a broken roll pin is sometimes very tricky. The tension makes them very hard to pull out of the anchor hole.

If you look at the finger and measure carefully. Is it possible to drill a hole, Just above or below the broken pin. Check closely, If above, Will the string winding come to far up on finger. If below, Will it inter fear with any other mechanism like a split tuning screw.

I have seen a few fingers that pin has been replaced above or below the broken pin successfully fitted.
View user's profile Send private message Send e-mail
Wayne Brown


From:
Bassano, Alberta, Canada
Post  Posted 18 May 2023 8:39 am     steel guitar parts
Reply with quote

i have new pins left over from my older PRP Mullen days
thanks
wayne
_________________
Owner Out West Music,Seats,Parts and accessories
www.outwestcountry.ca
View user's profile Send private message Send e-mail Visit poster's website
Steve Goodson

 

From:
South Carolina, USA
Post  Posted 18 May 2023 10:09 am     Changer finger
Reply with quote

Thanks for the info but I found what I need locally.
View user's profile Send private message Send e-mail
Steve Goodson

 

From:
South Carolina, USA
Post  Posted 18 May 2023 12:23 pm     Changer finger
Reply with quote

Thanks for the info but I found what I need locally.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron