| Author |
Topic: Need a pedal rod for an emmons push pull |
Andy Gibson
From:
Tennessee USA
|
Posted 4 May 2023 5:09 pm |
|
Just checking to see if there’s anyone out there that might have one or two spare pedal rods for a push pull they’re looking to sell. I broke one on a gig the other night and can’t take it to a welder because the part that broke off disappeared. I looked for it for an hour on the stage after the gig and couldn’t find it.
Broke off right where the rod gets turned down |
|
|
 |
john buffington
From:
Owasso OK - USA
|
Posted 5 May 2023 7:26 am Rods
|
|
| Andy check your mail. |
|
|
|
Jeff Peterson
From:
Nashville, TN USA
|
Posted 6 May 2023 7:31 pm
|
|
| Don't throw the rest of the rod away...it can be easily fixed. |
|
|
|
Dave Magram
From:
San Jose, California, USA
|
Posted 10 May 2023 9:13 pm
|
|
| Jeff Peterson wrote: |
| Don't throw the rest of the rod away...it can be easily fixed. |
Hi Jeff,
I'm curious--how can it be "easily fixed"?
I've got one or two broken pedal rods like that.
-Dave |
|
|
|
Jeff Peterson
From:
Nashville, TN USA
|
Posted 15 May 2023 2:47 pm
|
|
| stainless rod welded on the end...I've done several in the past and none have broken. |
|
|
|
Thomas Engleman
From:
Pennsylvania, USA
|
Posted 15 May 2023 6:28 pm
|
|
Hey Sparky...Take a photo of a "good one" and some dimensional info. I have a machine shop and have been making Capos for squareneck guitars and bell cranks for pedal steels, and lots of other related stuff for older gear.
I am sure I can help you...I just need a bit more information.
Tom |
|
|
|
Andy Gibson
From:
Tennessee USA
|
Posted 16 May 2023 5:26 am
|
|
| Sparky? |
|
|
|
