| Author |
Topic: reverser mechanismm. |
Alan Finch
From:
California, USA
|
Posted 20 Apr 2023 11:44 am |
|
| can sombody outhere show me a reverser set-up for a cable operated pedal steel guitar, a drawing would be fine . |
|
|
 |
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 21 Apr 2023 7:24 am
|
|
| Put a pulley between the lever and the keyhead and take the cable from the lever around the pulley and back to the changer. |
|
|
|
J D Sauser
From:
Wellington, Florida
|
Posted 22 Apr 2023 1:24 pm
|
|
| Jim Palenscar wrote: |
| Put a pulley between the lever and the keyhead and take the cable from the lever around the pulley and back to the changer. |
Glad to see YOU on here, Jim!… JD.
_________________
__________________________________________________________
Was it JFK who said: Ask Not What TAB Can Do For You - Rather Ask Yourself "What Would B.B. King Do?"
A Little Mental Health Warning:
Tablature KILLS SKILLS.
The uses of Tablature is addictive and has been linked to reduced musical fertility.
Those who produce Tablature did never use it.
I say it humorously, but I mean it. |
|
|
|
Sam Conomo
From:
Queensland, Australia
|
Posted 22 Apr 2023 2:06 pm Where is reverse
|
|
Good onya Jim.
Sam |
|
|
|
Chris Lucker
From:
Los Angeles, California USA
|
Posted 26 Apr 2023 2:44 pm
|
|
Are you looking for a way to lower with an all-pull cable guitar?
If so, have your tuning keys pivot with a pull like this where the tuning keys are mounted on a plate with a finger that pokes through to the bottom on the cabinet. The tuner pivots on the tuning key shaft that is passing through the keyhead, with a hole hopefully lines with an oilite bushing:
Rods are used here, but they are pull rods, so a cable would do the same thing. This is like a Bigsby pivoting tuning key system.
Or you do the Bigsby, Wright and Sho-Bud trick of bellcranks that are mounted BEHIND the fingers -- between the fingers and the endplate:
_________________
Chris Lucker
Red Bellies, Bigsbys and a lot of other guitars. |
|
|
|
