| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Standel Epoxy Modules
Reply to topic
Author Topic:  Standel Epoxy Modules
Cody Stewart

 

From:
Traverse City Michigan, USA
Post  Posted 26 Jan 2023 5:12 pm    
Reply with quote

I have a question for the Standel Nerds… Does anyone know of a guru that builds replacement modules to be used in-place of of the originals?

I just acquired a un-molested Studio 15, and it’s going into my tech this week for a good once over. I don’t believe any of my modules are bad, but in the event one is, I thought I would inquire about replacements.

Any info would be greatly appreciated.

Thanks,
Cody
_________________
Bolt On’s: Red Belly, Brown Belly, 73 Sho~Bud Pro~II, Fender’s/Peavey’s. If it doesn't sound like 1968, then I probably won’t like it.
View user's profile Send private message Send e-mail
Dennis Waltman

 

From:
Wisconsin, USA
Post  Posted 27 Jan 2023 9:51 am     Standel modules
Reply with quote

I also have a Studio 15 that has a noisy first channel, non-working reverb and tremolo. My tech thought it needed a few modules but he is too busy to get to it. I'd like to find a method to determine good/bad modules and to find replacements as needed. Thanks, Dennis
View user's profile Send private message Send e-mail
Greg Cutshaw


From:
Corry, PA, USA
Post  Posted 27 Jan 2023 10:58 am    
Reply with quote

One source:

http://www.standelamps.com/support/schematics/epoxy_mods.html
View user's profile Send private message Send e-mail Visit poster's website Yahoo Messenger
David Ball


From:
North Carolina High Country
Post  Posted 27 Jan 2023 2:24 pm    
Reply with quote

Michael Brebes here on the forum knows a lot about Standel, including the modules. I have an amp that Michael reverse-engineered a defective tremolo module and built a new one for it. It works perfectly.

Here's an old thread: https://bb.steelguitarforum.com/viewtopic.php?t=315016&highlight=standel+module
View user's profile Send private message Send e-mail
Brett Lanier

 

From:
Madison, TN
Post  Posted 29 Jan 2023 3:23 pm    
Reply with quote

Dan Lurie from FYD amps built a replica module circuit for my ‘65 Custom 15. I don’t remember how exactly he pulled it off but he did a great job. The components are assembled on a small circuit board that sits where the old module was. I bet he’d share what he knows about it if you wrote him an email.
View user's profile Send private message Send e-mail Visit poster's website
Michael Brebes

 

From:
Northridge CA
Post  Posted 30 Jan 2023 7:45 am    
Reply with quote

The input, mix, and reverb circuit modules can be built from the available schematics, with some modifications. The tremolo modules, unfortunately have to be built to fit the amp with opto parts that are available now.

Unfortunately, I need to have the amp chassis when replacing bad modules. It guarantees the proper mating of all the electronics in the amp.
_________________
Michael Brebes
Instrument/amp/ pickup repair
MSA D10 Classic/Rickenbacher B6/
Dickerson MOTS/Dobro D32 Hawaiian/
Goldtone Paul Beard Reso

Mesa Boogie Studio Pre/Hafler 3000
RP1/MPX100
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron