| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Adding pedals/knees to a BMI
Reply to topic
Author Topic:  Adding pedals/knees to a BMI
Dan Beller-McKenna


From:
Durham, New Hampshire, USA
Post  Posted 26 Jan 2023 1:58 pm    
Reply with quote

I received the parts today from BMI (thanks Don Fritsche!!) for a fourth pedal and a LKV to my S-10 (currently 3x4). I understand from talking to Don and from here on the Forum that the back apron needs to be removed to add the cross bars for pedals or levers. Having removed all the pull rods and the "upside down" knees, I have removed every hex bolt I can see that would hold that back apron in, including removing the keyhead endcap, but the apron is not budging an iota. It's not that it is caught or tough to move: it is on there as if it's welded in place (which I am sure it is not). I will put a call in tonight to Don, but I thought maybe someone on the Forum who had done this on a BMI would have some wisdom to impart.

It might just be that after @fifty years, it's going to take a few hard whacks to dislodge it from the top, but obviously I want to know that's called for before I start bangin' on the thing.

Anyone have any ideas based on BMI experience?

Thanks.
View user's profile Send private message Send e-mail Visit poster's website
Lee Baucum


From:
McAllen, Texas (Extreme South) The Final Frontier
Post  Posted 26 Jan 2023 2:10 pm    
Reply with quote

Maybe reach out to Johnie King. He did a complete rebuild on an older BMI:

https://bb.steelguitarforum.com/viewtopic.php?t=323088
_________________
Lee, from South Texas - Down On The Rio Grande

There are only two options as I see it.
Either I'm right, or there is a sinister conspiracy to conceal the fact that I'm right.


Williams Keyless S-10, BMI S-10, Evans FET-500LV, Fender Steel King, 2 Roland Cube 80XL's,
Sarno FreeLoader, Goodrich Passive Volume Pedals, Vintage ACE Pack-A-Seat
View user's profile Send private message Send e-mail
Dan Beller-McKenna


From:
Durham, New Hampshire, USA
Post  Posted 26 Jan 2023 2:17 pm    
Reply with quote

Thanks Lee. I saw that, but I didn't see the back apron removed in any of his pics. Although he had all the crossbars removed, so he either had that apron off or knows something I don't! Laughing
View user's profile Send private message Send e-mail Visit poster's website
Dan Beller-McKenna


From:
Durham, New Hampshire, USA
Post  Posted 26 Jan 2023 4:59 pm    
Reply with quote

Never mind. Quick chat with Don set me straight! Just a question of my bone-headed misinterpretation of "apron": but I sure did get a good inside look at the guitar, haha!
View user's profile Send private message Send e-mail Visit poster's website
Chris Brooks

 

From:
Providence, Rhode Island
Post  Posted 26 Jan 2023 8:50 pm    
Reply with quote

Dan, does Tommy Cass in Baldwinsville MA work on these? If so he's your man and pretty close.
View user's profile Send private message Send e-mail
Dan Beller-McKenna


From:
Durham, New Hampshire, USA
Post  Posted 27 Jan 2023 2:22 am    
Reply with quote

Oh yeah: I keep Tommy on speed dial, haha. No once I understood which screws Don meant, everything went very smoothly. Tom is a treasure though.
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron