| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic What about Fessenden
Goto page 1, 2, 3  Next
Reply to topic
Author Topic:  What about Fessenden
Robert Cates

 

From:
Maine, USA
Post  Posted 21 Nov 2006 2:21 pm    
Reply with quote

I am considering buying a new Fessenden sd-10. I have not heard much about them from all you guys and girls. I am quite new and I am upgrading from Sho-bud with one knee to a more modern guitar. Dealer has new Fessenden in stock and I'm going to check it out tommorrow

[This message was edited by Robert Cates on 21 November 2006 at 02:41 PM.]

View user's profile Send private message Send e-mail
Larry Robbins


From:
Fort Edward, New York
Post  Posted 21 Nov 2006 2:37 pm    
Reply with quote

I dont think you could go wrong with one! I have played a couple and I could not find anything not to like about them....go for it!

BTW, I believe that Herb Stiener plays a Fessie...if its good enough for Herb....

------------------
Sho~Buds, Fender amps & guitars, Tut Taylor resos, and Twang to the bone!


[This message was edited by Larry Robbins on 21 November 2006 at 02:37 PM.]

[This message was edited by Larry Robbins on 21 November 2006 at 02:44 PM.]

View user's profile Send private message Send e-mail
Robert Cates

 

From:
Maine, USA
Post  Posted 21 Nov 2006 2:48 pm    
Reply with quote

Thanks larry it seems like all of todays psg makers are making fine guitars and I'm not sure it makes any difference which maker you buy....They are ALL GOOD. Especially for a beginner like me...Just checking all you guys(experts) advice.
View user's profile Send private message Send e-mail
Gavin Dunn

 

From:
Edmonton, Alberta, Canada
Post  Posted 21 Nov 2006 2:48 pm    
Reply with quote

I'm in the process of buying a S10 off another forum member....He has two more of them. They play great....no complaints, in fact more praise than anything.

Do it!
View user's profile Send private message Send e-mail
Bob Blair


From:
Edmonton, Alberta, Canada
Post  Posted 21 Nov 2006 3:45 pm    
Reply with quote

And the builder is just down the road aways from you! I have a D-10 and a brand new SD-10 and they are both great guitars, as is the S-10 that Gavin is taking off my hands. There are a lot of great new guitars being built, but you can't go wrong with one of Jerry's.
View user's profile Send private message Send e-mail
Damir Besic


From:
Nashville,TN.
Post  Posted 21 Nov 2006 4:06 pm    
Reply with quote

wonderful guitars

Db

------------------

"Promat"
~when tone matters~ www.promatsteelguitars.com


View user's profile Send private message Send e-mail Visit poster's website
Robert Cates

 

From:
Maine, USA
Post  Posted 21 Nov 2006 4:51 pm    
Reply with quote

Thanks all you guys for commenting on these guitars. It makes me feel better knowing that lots of people think Jerry's guitars are very good. It is a big jump for me financially to get this guitar and I want to make sure its a good one because I am not one who jumps from guitar to guitar. ..Hey DB..I checked out your web site..How much money is 2400 euros?...Bob
View user's profile Send private message Send e-mail
Mike Wheeler


From:
Delaware, Ohio, USA
Post  Posted 21 Nov 2006 5:19 pm    
Reply with quote

Robert, I'd suggest you do yourself a huge favor and get to a pedal steel shop and try out a bunch of guitars for yourself. There are a lot of great ones to choose from....but which one is great to you is what matters most. You are about to invest a substantial amount of money. If I were you, I'd want to see the product first hand.
View user's profile Send private message Send e-mail
Jim Cohen


From:
Philadelphia, PA
Post  Posted 21 Nov 2006 5:23 pm    
Reply with quote

Fessy, whoa yeah! More than Acceptable!
View user's profile Send private message Send e-mail Visit poster's website
Larry Strawn


From:
Golden Valley, Arizona, R.I.P.
Post  Posted 21 Nov 2006 6:02 pm    
Reply with quote

Robert, I'm very satisfied with my Fessy U12, I don't think you can go wrong with one!

Larry

------------------
"Fessy" S/D 12, 8/6 Hilton Pedal, Sessions 400 Ltd. Home Grown E/F Rack
"ROCKIN COUNTRY"

View user's profile Send private message Send e-mail
Doug Seymour


From:
Jamestown NY USA (deceased)
Post  Posted 21 Nov 2006 6:31 pm    
Reply with quote

I think Jerry has the best bellcrank in the business! It sure seems great to me, just looking it over that is.....never had one. Am I right, you loosen the tuning nut a little & you can change the leverage (bellcrank connecting point) easily & tighten it up again & you're back in business!
View user's profile Send private message Send e-mail
KENNY KRUPNICK

 

From:
Columbus, Ohio
Post  Posted 21 Nov 2006 7:02 pm    
Reply with quote

Love them Fessenden steel guitars.
View user's profile Send private message Send e-mail
Joe Casey


From:
Weeki Wachee .Springs FL (population.9)
Post  Posted 21 Nov 2006 7:17 pm    
Reply with quote

Robert Randolf certainly likes his,and just about anyone I know that has one swears by them.
View user's profile Send private message Send e-mail
CrowBear Schmitt


From:
Ariege, - PairO'knees, - France
Post  Posted 22 Nov 2006 1:56 am    
Reply with quote

Robert, Fessenden is right up there w: the best
i helped a couple of steelers here get some D10s from the Fo'bros
Last i heard, they was plenty satisfied & happy w: their Fessies
these guys play out regularly
Robert, Jerry Fessenden is not too far away from you either
Montpelier Vermont

[This message was edited by CrowBear Schmitt on 22 November 2006 at 02:03 AM.]

View user's profile Send private message Send e-mail Visit poster's website
Robert Cates

 

From:
Maine, USA
Post  Posted 22 Nov 2006 4:44 am    
Reply with quote

OK..sounds good to me..I am going to check it out today.. I will let you all know what I did....NOW...I have another ? Should I keep my fathers old sho-bud or should I trade it in? I have heard some of you say that you should have kept some of your guitars that you had gotten rid of. its a pro 1 1976 or77(I think) single with only one kl. Its very good condition...Thanks for all your replys...Bob
View user's profile Send private message Send e-mail
Jim Sliff


From:
Lawndale California, USA
Post  Posted 22 Nov 2006 5:08 am    
Reply with quote

I'd keep it if you can. Those are nice, lightweight steels and often have additional knees added. In fact, if you like it, another thought would be just to have the knee levers added and play it, saving yourself some money.

I also second what Mike said - try before you buy. I've bought guitars without playing them first and been horribly disappointed, even though they were supposedly great guitars. A guitar is like a pair of shoes - it fits you or it doesn't, and buying blind (or deaf?) isn't always the best practice.
View user's profile Send private message Send e-mail
John Macy

 

From:
Rockport TX/Denver CO
Post  Posted 22 Nov 2006 6:35 am    
Reply with quote

I switched over to Fessy's around 1998, after playing Emmons for 25 or so years, and have never looked back. I have a lacquer D10 and a mica SD10, and am looking forward to adding a third, a mica D10, soon. Jerry not only builds a wonderful guitar, but is also willing to work with you to get what you want. And on top of that, he is one of the nicest guys around, and I got a lifelong friend to go along with it...
View user's profile Send private message Send e-mail Visit poster's website
Darvin Willhoite


From:
Roxton, Tx. USA
Post  Posted 22 Nov 2006 7:43 am    
Reply with quote

I agree with the other posters here. I bought one in '98 and have been extremely happy with it. I own several other steels and the Fessenden ranks right up there with the rest in tone and playability. Jerry is a great person to deal with too. Since mine is mica covered, I usually use it when I play out, other than my regular church gig. It is durable and has held up well to being hauled around.

Here's a picture of mine with some old gray haired grandpa playing it.


------------------
Darvin Willhoite
Riva Ridge Recording


View user's profile Send private message Send e-mail
Larry Bell


From:
Englewood, Florida
Post  Posted 22 Nov 2006 8:26 am    
Reply with quote

My guitars:


The handsome fellow on the left usually accompanies me to gigs.

'Nuff said

------------------
Larry Bell - email: larry@larrybell.org - gigs - Home Page
My CD's: 'I've Got Friends in COLD Places' - 'Pedal Steel Guitar'
2003 Fessenden S/D-12 8x8, 1969 Emmons S/D-12 6x6, 1984 Sho-Bud S/D-12 7x6, 1971 Dobro, Standel and Peavey Amps
View user's profile Send private message Send e-mail Visit poster's website
David Doggett


From:
Bawl'mer, MD (formerly of MS, Nawluns, Gnashville, Knocksville, Lost Angeles, Bahsten. and Philly)
Post  Posted 22 Nov 2006 8:38 am    
Reply with quote

Well, I hate to be the only spoil sport. But this is a players forum, not a manufacturers promo site. You deserve completely honest opinions. My Fessy had mechanical problems that were inherent in the design. The tone was fine, but the action was the least smooth of other modern pedal steels I have owned or played, which include, Zum, MSA Millennium, Carter, Sho-Bud Pro III, and Excel. In fairness, it was a used Fessy; and I didn't send it back to Jerry for adjustment. But I have always worked on my own pedal steels, and have always been able to get them adjusted to suit me and playing very smooth. The Fessy I couldn't. Others love them and seem to have no problems. But it wasn't the one for me. Just one opinion, but a completely honest one.

[This message was edited by David Doggett on 22 November 2006 at 08:39 AM.]

View user's profile Send private message Send e-mail
Jim Gorrie


From:
Edinburgh ~ road works congestion capital of The World.
Post  Posted 22 Nov 2006 11:20 am    
Reply with quote

Robert ~ have a look here . . .


[This message was edited by Jim Gorrie on 22 November 2006 at 11:21 AM.]

View user's profile Send private message Send e-mail
Ron Sodos


From:
San Antonio, Texas USA
Post  Posted 22 Nov 2006 12:11 pm    
Reply with quote

I own a 2001 Zum D10, a Sho-Bud D12, and a Fessenden D10. I play the Fessy at all my gigs and play the others at home for practicing. Why, because the Fessy sounds better and plays better. By the way they have the identical pickups (BL 710's). Plus Jerry is one of the nicest guys you will ever meet.
View user's profile Send private message Send e-mail
Jon Light


From:
Saugerties, NY
Post  Posted 22 Nov 2006 12:32 pm    
Reply with quote


When I get the time (and space) I'll get out the Emmons (a twin of Larry's) and do a similar photo 'cause Larry's centerfold spread looks so cool. I really like the Fess. It is so very different from the Carter which is exactly how I would want it--why have two guitars that are alike.
View user's profile Send private message Send e-mail Visit poster's website
Tucker Jackson

 

From:
Portland, Oregon, USA
Post  Posted 22 Nov 2006 12:40 pm    
Reply with quote

That's a beauty, Jon. Care to elaborate on the differences between your Fessy and Carter?
View user's profile Send private message Send e-mail
Jim Cohen


From:
Philadelphia, PA
Post  Posted 22 Nov 2006 1:45 pm    
Reply with quote

I have owned 3 Fessies and they all were terrific guitars. I think David D.'s experience is an outlier, from what I know from speaking with lots of Fessy owners, and maybe is related to his second-hand axe having had an uncertain history before arriving on his doorstep? Not sure, but the weight of evidence is a definite 'YES' on 'FES' !

[This message was edited by Jim Cohen on 22 November 2006 at 01:45 PM.]

View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron