Pro III sho-bud

George Duncan Sypert · From: Colo Spgs, Co, USA

Trying to help a new owner of a Pro III single neck, (C6 removed). I think that the pull rods are not in the correct holes on a 5 hole bell crank. I am correct in thinking that the 5th should be closer to the body of the guitar and the 10 string being in the 3rd or 4th hole of the bell crank. Also does the tuning nut tighten up to the changer finger flush to return the pedal back to the body when released.

The pedal rods all seem to be reversed from longest travel to shortest. The 5th string is higher up the shaft of the bell crank and the 10th is lower.

Does anyone have a rodding chart for a Pro 111 that could be emailed to me, I would appreciate it.

Thanks,

George Sypert

George Duncan Sypert · From: Colo Spgs, Co, USA

Found one.

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: