| Author |
Topic: pull rod needed for older ZumSteel |
Joe Shelby
From:
Walnut Creek, California, USA
|
Posted 29 Oct 2022 7:31 am |
|
I was changing strings on the C neck and pumping pedal 8 (standard C6th setup) while bringing the C string (7th string) up to pitch and something went click. The pedal rod had snapped in two where the pin that holds the rod in the bell crank intersects the bell crank.
The rod measures 11 1/4". The guitar is a 1988 Zum with center pull bell cranks.
I don't know why the rod snapped but I've never had any problems with this guitar in the 34 years I've had it. I'm kind of vexed as to what caused this.
I have no machine shop skills or equipment to make a new one so I'm reaching out to the forum members for help.
Thanks in advance.
Joe
 |
|
|
 |
Joe Shelby
From:
Walnut Creek, California, USA
|
Posted 2 Nov 2022 6:12 am
|
|
Should I try taking the pull rod to a machine shop and have them make me a new one? I realize it's a small job comparatively speaking; I guess all they can say is no or I have to have them make up 90 of 'em to make it worth their while...Any suggestions are welcome.
Joe |
|
|
|
John De Maille
From:
On a Mountain in Upstate Halcottsville, N.Y.
|
Posted 2 Nov 2022 12:17 pm
|
|
| Have you contacted Bruce? I know he's retired, but, he may be able to hook you up. |
|
|
|
Joe Shelby
From:
Walnut Creek, California, USA
|
Posted 2 Nov 2022 4:57 pm
|
|
| How do I get a hold of Bruce? I called the number listed in the online Zum owner's manual but it is disconnected. |
|
|
|
John De Maille
From:
On a Mountain in Upstate Halcottsville, N.Y.
|
Posted 2 Nov 2022 5:49 pm
|
|
| He's alsoamember of the forum. You could look here and send him a message. |
|
|
|
Bruce Zumsteg
From:
Harrisonville, Missouri, USA
|
Posted 4 Nov 2022 6:45 am
|
|
Joe, I sent you an email.
BZ |
|
|
|
Joe Shelby
From:
Walnut Creek, California, USA
|
Posted 4 Nov 2022 3:09 pm
|
|
Thanks Bruce and John.
Joe |
|
|
|
Morton Kellas
From:
Chazy, NY, USA 1
|
Posted 7 Nov 2022 11:57 am
|
|
| Were you able to get your pull rod? |
|
|
|
Joe Shelby
From:
Walnut Creek, California, USA
|
Posted 7 Nov 2022 12:40 pm
|
|
Morton, Bruce is looking into getting me the pull rod.
Joe. |
|
|
|
Morton Kellas
From:
Chazy, NY, USA 1
|
Posted 7 Nov 2022 12:57 pm
|
|
| Great, Bruce is the man. |
|
|
|
