Randy Sims
From:
Virginia, USA
|
Posted 26 Oct 2022 9:10 am |
|
| I have a Goodrich LDR 1 volume pedal that I purchased from eBay. The pedal works fine, and it came with a MAGNETEK AC ADAPTER MODEL WDU18-600 OUTPUT 18VDC 600mA TRANSFORMER 18V DC power adapter. Someone had changed the connector plug on the power adapter that plugs into the volume pedal, of which is located at the back of the pedal. The plug does not fit firmly, and has a slight looseness to it. I ordered a new power adapter of the exact same brand that I have, and it does not connect firmly either. I've read a few older post concerning this issue. I was wondering if anyone could tell me if this is the correct power supply unit for the LDR 1, and if not, what is the correct unit. Can anyone tell me what size power connectionn the LDR 1 pedal takes. Any help is greatly appreciated. Thanks |
|
Randy Sims
From:
Virginia, USA
|
Posted 29 Oct 2022 9:16 pm Volume Pedal Power Supply Connection • Goodrich LDR 1
|
|
| Both Kevin at Goodrich, and Gary Sill of Sills Music were very helpful in reaching out by phone, and sharing helpful information. I found a power adapter with the appropriate voltage, and barrel and tip size which makes a firm connection. A special thanks to both Kevin and Gary for their assistance and support. |
|
