Dogbone.

colin mcintosh · From: Australia

Working on my guitar I lost a dogbone.
So as a repair I've expanded on a repair seen previously to replace it and it is a very simple solution.
I used a pop rivet and with a Dremel and cutting disc.

Grind the rivet on either side so that it remains whole. Simple fix and easy to do whether it be temporary or permanent.

Ron Hogan · From: Nashville, TN, usa

If you find the right rivet, you don’t need to make the notch in the middle and it’ll slide right in the hole of the pull finger/bell crank.

https://www.facebook.com/groups/1826662064274553/permalink/3289895087951236/?mibextid=6pSAYW

colin mcintosh · From: Australia

True but by notching the rivet you can use the original rod and have a more snug fit with rivet. But to each his own.

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: