Where to put volume pedal

Ben Godard · From: Jamesville NC

So I have always used my Goodrich passive pot pedal right after my steel. Then send that output to my processor. My pedal is 500k ohms I believe . That high impedance for An instrument level connection if I’m thinking right

So I’m am looking to get a Goodrich H10k pedal. I’m assuming this has a 10k pot. So the problem is, if I’m correct, this is for line level only and probably won’t work very well directly after the guitar.

Am I correct on this?

John Fields · From: Collinsville, Mississippi; USA

It wouldn't work right in front of most amps but you could use it on the Pre EQ loop on most Peavey Nashville models. It would also work in most buffered effects loops.
_________________
Thanks,
John C. Fields

Peavey's MI Amplifier Engineering Manager (1997-current) Hessiemae Electronic Services (repairs/mods/parts)
hessiemae@hotmail.com
601-934-2163
CONTACT ME FOR VINTAGE PEAVEY REPAIRS

Gene Tani · From: Pac NW

If you're ordering from Goodrich/Kevin, you can ask for a 250k or 500k pot or any variant like 470 (I don't think i've heard of anybody using 250k for steel but you can just ask him.

Kind of a tough topic to search archives but here's one thread https://bb.steelguitarforum.com/viewtopic.php?t=170114
_________________
- keyless Sonny Jenkins laps stay in tune forever!; Carter PSG
- The secret sauce: polyester sweatpants to buff your picks, cheapo Presonus channel strip for preamp/EQ/compress/limiter, Diet Mountain Dew

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: