| Author |
Topic: Sho-Bud 1970s pull finger |
Alan Struthers
From:
New Jersey, USA
|
Posted 12 Jun 2022 1:56 pm |
|
I've got a mid-1970s Sho-Bud Pro II that needs a 4-hole (2 raise, 2 lower) pull finger because the original pot-metal one just broke.
Does anyone out there have one you can sell me? Or do you know anyone who carries old parts like this for the old Buds? Alternately, is there anyone who is fabricating parts? It seems like there are enough of the old Buds around that someone might have parts.
Thanks for any help you can provide!
_________________
Gettin' better . . .
Excel ExSTAR U12, Mullen Royal Precision D-10, MCI SD10, Peavy Nashville 112, Fender Princeton, Gibson RB-3, Gold Tone dobro, Martin D-18, and other stuff |
|
|
 |
Barry Coker
From:
Bagley Alabama, USA
|
Posted 12 Jun 2022 5:42 pm
|
|
Check with Jeff Surrett At Sho Pro he was making fingers and doing full rebuilds on thosd changers.
Good Luck Barry
_________________
Zum-D-10, Webb 614-E, 65 Pro Reverb, Evans RE200, 69 Gibson Birdland, 89 Telecaster EAD Bad!! |
|
|
|
Ian Worley
From:
Sacramento, CA
|
Posted 12 Jun 2022 6:16 pm
|
|
Where did it break? Can you post a pic?
You can replace just the top pot metal portion of the finger assembly, assuming the steel scissor portion is still ok. The 2/2 Bud finger is the least common variant, not that many around, but the top pot metal finger portion is interchangeable with any of the later 3/2 versions
_________________
All lies and jest, still a man hears what he wants to hear and disregards the rest - Paul Simon |
|
|
|
