| Author |
Topic: spacer for Sho~bud Professional pedal bar |
Glenn Burleigh
From:
St. Louis, MO, USA
|
Posted 3 May 2022 7:40 pm |
|
Hey everybody,
I just bought John Higgins' old Professional. There are a couple of things that I need to do to get it really playing smooth. One of the things is that the first four pedals seem to have space between them that lends itself to a loud noise. There appears to have been a spacer that has been lost, though it could be just due to years of wear. Anyway, I'm guessing my best bet is to get a nylon spacer and sand it down to the needed width. Just figured that I would check here, just in case there is some kind of purpose-made part I should be getting. Otherwise, I'm guessing that ACE hardware can help me out.
_________________
Dekley Slimline 3x4, Sho~bud Professional, Encore 3x5, Fender Custom Professional, Gold Tone PDS-D, Melbert Roundabout, Gibson Les Paul Junior Special, Ibanez Custom Agent, Danelectro U2 Baritone, various Teles and Strats. |
|
|
 |
Ron Pruter
From:
Arizona, USA
|
Posted 4 May 2022 8:49 am
|
|
Need pictures please.
_________________
Emmons SKH Le Grande, '73 Fender P/J bass, Tick tack bass, Regal high strung, USA Nashville 112. |
|
|
|
Glenn Burleigh
From:
St. Louis, MO, USA
|
Posted 10 May 2022 7:56 am
|
|
Sorry for the slow response, but here's a picture. I've circled the gap. It's just a few millimeters of space, but it causes a lot of mechanical noise.
_________________
Dekley Slimline 3x4, Sho~bud Professional, Encore 3x5, Fender Custom Professional, Gold Tone PDS-D, Melbert Roundabout, Gibson Les Paul Junior Special, Ibanez Custom Agent, Danelectro U2 Baritone, various Teles and Strats. |
|
|
|
Will Ellis
From:
Nashville TN, USA
|
Posted 10 May 2022 11:17 am
|
|
Yeah I imagine a nylon washer would be a quiet solution.
_________________
Sho~Bud Professional D-10 (1972)
Fender Twin Reverb (1979) |
|
|
|
Glenn Burleigh
From:
St. Louis, MO, USA
|
Posted 11 May 2022 3:43 pm
|
|
That's what I was thinking. Thanks for letting me know I'm on right path.
_________________
Dekley Slimline 3x4, Sho~bud Professional, Encore 3x5, Fender Custom Professional, Gold Tone PDS-D, Melbert Roundabout, Gibson Les Paul Junior Special, Ibanez Custom Agent, Danelectro U2 Baritone, various Teles and Strats. |
|
|
|
Paul Redmond
From:
Illinois, USA
|
Posted 22 May 2022 11:30 am
|
|
Check with McMaster-Carr.
PRR |
|
|
|
Allen Merrell
From:
Georgia, USA
|
Posted 5 Jun 2022 3:50 am
|
|
I have made pedal bar spacers before out of plastic milk cartons. they are easy to cut out and you can make a hole punch out of a piece of thin wall tubing or get a hole punch kit from Harbor Freight.
_________________
72 ShoBud 6153 D10, Encore, Nashville 112, Boss Katana, Spark 40, Quilter TT12, GT001, ProFex II,Jackson Pitch changer (Love this bender) |
|
|
|
Bobby D. Jones
From:
West Virginia, USA
|
Posted 5 Jun 2022 11:00 am
|
|
| The flat plastic lids from some 1 gallon Ice Cream containers makes great spacer washer material also. Just punch proper size hole, cut outside to fit with scissors. |
|
|
|
