| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic What kind of foam for pad?
Reply to topic
Author Topic:  What kind of foam for pad?
Brett Hansen

 

From:
Michigan, USA
Post  Posted 7 May 2022 9:56 am    
Reply with quote

I'm recovering the pad on an sd10. What is the best type of foam that won't break down as easy?
View user's profile Send private message Send e-mail
Bobby D. Jones

 

From:
West Virginia, USA
Post  Posted 7 May 2022 8:56 pm    
Reply with quote

I do not like for my wrists/arms to bury into the pad. I want to slide smooth over the pad.
1 of the very firm Grey Foams like used in steel guitar seats may be firm enough for good support.

I have put pads on a MSA S10, And 2 S12 guitars. I made the wood thick enough that I only used, Quilt filler or Polar fleece cloth for cushion on these.


Here is the picture of 1 of the pads with a place to put my bar and picks at the key head end. Very handy and protects bar/picks from falling when parked.
View user's profile Send private message Send e-mail
David Nugent

 

From:
Gum Spring, Va.
Post  Posted 11 May 2022 8:23 am    
Reply with quote

The type of foam used for motorcycle seats and boat cushions works well.
View user's profile Send private message
Jerry Overstreet


From:
Louisville Ky
Post  Posted 15 May 2022 6:24 pm    
Reply with quote

///

Last edited by Jerry Overstreet on 25 May 2022 4:17 pm; edited 1 time in total
View user's profile Send private message Send e-mail
Dan Robinson


From:
Colorado, USA
Post  Posted 17 May 2022 8:47 am    
Reply with quote

Brett, I used some thin EVA foam to redo my pad. EVA is a high-density, closed-cell foam, rugged and long lasting. It's available in various thicknesses. I think I used some that was around 4 mm thick. The pad is covered with faux-suede cloth that I found in a fabric store. It's a lot more comfortable than the vinly (expecially when it's hot). It has a lower profile that doesn't get in my way like the original thick pad did.

It's mounted on offset washers that maintain some separation above the top of the cabinet.

https://bb.steelguitarforum.com/viewtopic.php?p=2930489&highlight=#2930489

A couple of pictures from my rebuild:



View user's profile Send private message Send e-mail
Richard Vogt

 

From:
Iowa, USA
Post  Posted 31 Jan 2023 7:56 am     Pick-up plate for Emmons PP
Reply with quote

Where could I get a new pick-plate for Emmons PP the one I have was cobble up and the screws won't work to raise or lower.thank you Richard Vogt. Any body have one laying around I can buy.
View user's profile Send private message Send e-mail
K Maul


From:
Hadley, NY/Hobe Sound, FL
Post  Posted 31 Jan 2023 8:30 am    
Reply with quote

I like memory foam kitchen mats from WalMart or Job Lots. Yes.
_________________
KEVIN MAUL: Airline, Beard, Clinesmith, Donner, Evans, Excel, Fender, Fluger, GFI, Gibson, Hilton, Ibanez, Justice, K+K, Live Strings, MOYO, National, Oahu, Peterson, Quilter, Rickenbacher, Sho~Bud, Supro, TC, Ultimate, VHT, Williams, X-otic, Yamaha, ZKing.
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron