| Author |
Topic: Push Pull issues in DFW |
Hunter Pierrotti
From:
Terrell, Texas
|
Posted 10 May 2022 9:25 am |
|
I have an 80’s push pull Emmons that’s having an issue with one the raises. I live in DFW and am having a hard time finding someone to work on it. Does anyone here happen to know of somebody out this way?
_________________
96 Pre RP Mullen SD10 |
|
|
 |
Jim Cooley
From:
The 'Ville, Texas, USA
|
Posted 10 May 2022 10:36 am
|
|
| Hunter - Have you tried Steve Lamb @ Lamb's music? |
|
|
|
Hunter Pierrotti
From:
Terrell, Texas
|
Posted 10 May 2022 6:26 pm
|
|
| Jim Cooley wrote: |
| Hunter - Have you tried Steve Lamb @ Lamb's music? |
I have not! That’s not far from me. I’ll have to give him a call.
_________________
96 Pre RP Mullen SD10 |
|
|
|
Chuck Hamilton
From:
Flower Mound, Texas, USA
|
Posted 10 May 2022 7:40 pm
|
|
It’s not far from you to Texarkana where one of the best lives, Henry Matthews. That’s who I go to and I live near Denton. Worth the drive.
_________________
Too much crap to list and who really cares anyway?? |
|
|
|
Brendan Mitchell
From:
Melbourne Australia
|
Posted 10 May 2022 10:36 pm
|
|
| Is it the high E string ? Only asking because I have never been able to get mine working 100% . |
|
|
|
Henry Matthews
From:
Texarkana, Ark USA
|
Posted 11 May 2022 8:17 am
|
|
The timing and amount of slack on the 4th string or any string that raises and lowers for that matter has to be right to get them to tune properly.
What string you having problem with?
_________________
Henry Matthews
D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes. |
|
|
|
Hunter Pierrotti
From:
Terrell, Texas
|
Posted 11 May 2022 7:01 pm
|
|
| Henry Matthews wrote: |
The timing and amount of slack on the 4th string or any string that raises and lowers for that matter has to be right to get them to tune properly.
What string you having problem with? |
It’s the first string. Seems like no matter how high I adjust it, the first string raise won’t get close to the full step raise. It’s like half a step off. Think maybe it has to do with the pull hook maybe.
_________________
96 Pre RP Mullen SD10 |
|
|
|
Henry Matthews
From:
Texarkana, Ark USA
|
Posted 11 May 2022 7:13 pm
|
|
 It’s really hard to get first string to raise whole step unless you have a longer bell crank. Also another way is to hook the little wire hook down where the lower rod usually goes. Activate you knee and adjust collar to where pulls all way to guitar body or stop. You can do this by sight, then set guitar back up, activate knee and using key head, tune string to G# with knee activated. Let off knee and tune open back to F# with the lower screw on end plate. You can just remove the screw or Allen head that usually tunes opens.
The first pic is without knee activated, 2nd is with knee activated.
_________________
Henry Matthews
D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes. |
|
|
|
Jody Cameron
From:
Angleton, TX,, USA
|
Posted 11 May 2022 8:30 pm
|
|
| I use the lower finger to raise that one. Long travel, but works great.😁 |
|
|
|
Hunter Pierrotti
From:
Terrell, Texas
|
Posted 15 May 2022 4:42 pm
|
|
| Henry Matthews wrote: |
It’s really hard to get first string to raise whole step unless you have a longer bell crank. Also another way is to hook the little wire hook down where the lower rod usually goes. Activate you knee and adjust collar to where pulls all way to guitar body or stop. You can do this by sight, then set guitar back up, activate knee and using key head, tune string to G# with knee activated. Let off knee and tune open back to F# with the lower screw on end plate. You can just remove the screw or Allen head that usually tunes opens.
The first pic is without knee activated, 2nd is with knee activated. |
Alright guys I have solved my problem. The set screw on the locking collar had just loosened and caused it to move further down towards the bell crank. Just moved it back up and it’s back in tune!
_________________
96 Pre RP Mullen SD10 |
|
|
|
Jim Cooley
From:
The 'Ville, Texas, USA
|
Posted 15 May 2022 5:46 pm
|
|
| Jody Cameron wrote: |
| I use the lower finger to raise that one. Long travel, but works great.😁 |
I have a problem getting my first string to raise a fill tone, too. Do you get a full tone or half tone raise by doing that? |
|
|
|
Henry Matthews
From:
Texarkana, Ark USA
|
Posted 18 May 2022 9:34 pm
|
|
| Jim Cooley wrote: |
| Jody Cameron wrote: |
| I use the lower finger to raise that one. Long travel, but works great.😁 |
I have a problem getting my first string to raise a fill tone, too. Do you get a full tone or half tone raise by doing that? |
Jim, I think in the pictures that I posted is what Jody was talking about. Using the lower finger for the raise and yes, you can raise a whole tone easily.
_________________
Henry Matthews
D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes. |
|
|
|
