| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic SE9 vs EM9 on Stroboplus hd
Reply to topic
Author Topic:  SE9 vs EM9 on Stroboplus hd
Brett Hansen

 

From:
Michigan, USA
Post  Posted 30 Jan 2022 7:44 am    
Reply with quote

I've got my E9 tuned to the SE9 on my Stroboplus and when trying to follow along on some YouTube videos it sounds off. Do most people use the EM9 settings?
View user's profile Send private message Send e-mail
David Nugent

 

From:
Gum Spring, Va.
Post  Posted 30 Jan 2022 7:57 am    
Reply with quote

I prefer 'OE9' (which uses the same basic offsets as the chart in Scotty's book, 'The Anthology of Pedal Steel Guitar') and tunes the 'E-strings' to 440. I believe that the 'SE9' is based on Jeff Newman's tuning method which sets the 'E-strings at 442.
View user's profile Send private message
Tommy Mc


From:
Middlesex VT
Post  Posted 31 Jan 2022 5:04 pm    
Reply with quote

I find my guitar sounds most in tune with OE9. That's essentially the same offsets as SE9, except it uses 440 reference as opposed to 442. I did try EM9 for awhile, but found OE9 sounded better.....on my guitar, and to my ears. YMMV.
View user's profile Send private message Send e-mail
Jack Stoner


From:
Kansas City, MO
Post  Posted 1 Feb 2022 3:08 am    
Reply with quote

SE9 for me. I used a modified OE9 for years, until I got a Peterson Stroboplus HD tuner. Tried several, including OE9, EM9 and settled on the SE9. Works perfect for me, for recording and live playing on both a Franklin and two GFI's.

Actually, I have my own "JE9" that is based on the SE9 opens and associated pedals/knees into one program.
View user's profile Send private message Send e-mail
Ray Gehringer

 

From:
New Jersey, USA
Post  Posted 1 Feb 2022 6:04 am    
Reply with quote

From the looks of things you guys are using the desk top Peterson/Strobe unit. I was planning on getting the Stompbox version (StroboStomp HD) although the Desktop version would be nice because eliminates the need for cords.

When tuning with the Desktop unit where do you place it and will the internal mic pick up the un-amplified strings if placed atop the steel or is amplification needed? Thanks.
View user's profile Send private message
David Dorwart


From:
Orlando, Florida, USA
Post  Posted 1 Feb 2022 7:02 am    
Reply with quote

Somebody help me here. Those sweetened tunings are meant to offset effect of cabinet drop? Doesn’t cabinet drop vary from guitar to guitar? What might offset for a double neck Emmons differ from a single neck GFI? I’ve tried those sweetened tunings and to me they sound off pitch - maybe because they are? I always drift back to straight up tuning. Don’t know if it matters but I’m using the digital version of Peterson strobe tuner which offers both settings Es tuned to 440 and the other to 442
View user's profile Send private message Send e-mail
Jason Putnam


From:
Tennessee, USA
Post  Posted 1 Feb 2022 7:24 am    
Reply with quote

David you are correct. Those presets are a generic setting. The only true way to be in tune is to create your own offsets for your guitar because they are all different. Even guitars from the same manufacturer will vary.
_________________
1967 Emmons Bolt On, 1995 Mullen PRP 3x5,Nashville 112, JOYO Digital Delay, Goodrich Volume Pedal, Livesteel Strings
View user's profile Send private message Send e-mail
Jack Stoner


From:
Kansas City, MO
Post  Posted 1 Feb 2022 7:31 am    
Reply with quote

"Sweetened" is a term that Peterson uses for basically tuning compensation but NOT for cabinet drop. e-mail me and I'll send you a PDF Peterson document on steel guitar tunings.

Cabinet drop is basically a non-issue on both a GFI Ultra D-10 I had or the GFI Ultra S-10 with pad that I have now.

There is a multitude of threads on this forum about tunings and tuning methods. Everyone seems to have their own method. I was chided by a well known Nashville steel guitar picker when he saw me using the Buddy Emmmons harmonic tuning method to tune the 9th and 10th C6h strings as "they are out of tune".
View user's profile Send private message Send e-mail
Roy Carroll


From:
North of a Round Rock
Post  Posted 1 Feb 2022 7:46 am    
Reply with quote

OE9 and OP9 for me as well. I used SE9 and SP9 for a while but, it did not sound as good to my ears. I sometimes play with a piano, and the E's will sound out of tune if you use SE9.
I tend to fine tune it after using the tuner, like Mr.Stoner.
_________________
Just north of the Weird place, south of Georgetown
View user's profile Send private message Send e-mail
Ray Gehringer

 

From:
New Jersey, USA
Post  Posted 1 Feb 2022 8:11 am    
Reply with quote

Ray Gehringer wrote:
From the looks of things you guys are using the desk top Peterson/Strobe unit. I was planning on getting the Stompbox version (StroboStomp HD) although the Desktop version would be nice because eliminates the need for cords.

When tuning with the Desktop unit where do you place it and will the internal mic pick up the un-amplified strings if placed atop the steel or is amplification needed? Thanks.


Was it something I said? Thanks anyway.
View user's profile Send private message
Tucker Jackson

 

From:
Portland, Oregon, USA
Post  Posted 1 Feb 2022 10:41 am    
Reply with quote

Nothing you said. I don't think many people use the desktop version (including the guys above), so we may be dealing with a lot of "Good question... I don't really know." Note: on the pedal, you can shift between the different flavors of the Newman tuning systems discussed here using buttons on the pedal. They are already loaded on the pedal, so it's not a computer thing.

For what it's worth, I have a tuning app on my phone (not Peterson) and it will tune an unamplified steel in a quiet room as long as it's within several feet of the guitar.
View user's profile Send private message Send e-mail
Ray Gehringer

 

From:
New Jersey, USA
Post  Posted 1 Feb 2022 1:48 pm    
Reply with quote

Thank you, Tucker. Appreciated.
View user's profile Send private message
Brett Hansen

 

From:
Michigan, USA
Post  Posted 1 Feb 2022 3:14 pm    
Reply with quote

Thanks everyone I'm using om9/op9 now and it seems to be better for me.
View user's profile Send private message Send e-mail
Tommy Mc


From:
Middlesex VT
Post  Posted 2 Feb 2022 3:50 pm    
Reply with quote

David Dorwart wrote:
Somebody help me here. Those sweetened tunings are meant to offset effect of cabinet drop?.............


No, not really. Cabinet drop is one reason that particular sweeteners work better on some guitars than others, but that's a side effect, not their reason for being. The sweeteners are closer to "Just Intonation" where the instrument is in tune to itself. It's sweeter because it's in tune. The problem is that "straight up" tuning uses "Equal Temperament", a system developed so pianos could play in all keys. It's actually a compromise where notes are equally out of tune. Most of the other instruments you play with will be using ET, so I think the sweeteners are attempts to keep the steel as close to JI (in tune with itself) without sounding too far off from the rest of the band.
View user's profile Send private message Send e-mail
Alan Bidmade


From:
Newcastle upon Tyne UK
Post  Posted 3 Feb 2022 7:13 am    
Reply with quote

Listen and follow Jack Stoner's advice. Works for me.
_________________
Ben-Rom #017 'Lorelei', Guild D25, Epiphone 'Joe Pass', Roland 40XL, Hilton VP

First name Alan, but known as Nick
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron