| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Steel bar help for arthritic hands
Reply to topic
Author Topic:  Steel bar help for arthritic hands
James Ives

 

From:
California, USA
Post  Posted 24 Nov 2021 7:38 pm    
Reply with quote

Like many older guys ( I imagine) I have arthritic hands, making bar holding a challenge.
What devices or aids have you guys and girls found for this problem, please?
View user's profile Send private message Send e-mail
Reinhard Brodesser

 

From:
New York, USA
Post  Posted 24 Nov 2021 8:08 pm    
Reply with quote

I've also had difficulty holding a bar with my Carpal Tunneled hands. My solution is to use some sticky backed Velcro. Two skinny strips about a quarter inch wide by 1 inch long put on the steel, and then using a non sticky Velcro strap around my index finger onto the bar.
View user's profile Send private message Send e-mail
Bobby D. Jones

 

From:
West Virginia, USA
Post  Posted 24 Nov 2021 9:44 pm    
Reply with quote


The one thing I have found is a 1" X 3 3/4". Later I may have to go more mechanical like Vel-Cro.
The longer bar allows the back of the bar seat between my palm and thumb holding the back of the bar firm. The 1" diameter allows the bone in my thumb and middle finger to be below the center of the bar, Putting the largest part of the bar in a wedged position between my fingers. It shows in the picture by the reflection.

I found this bar by accident, Not good planning, I bought this GFI S12 guitar from a friend and the bar was in the deal. Once I got it in my hand, It gave me such control I ordered a spare to be safe.
View user's profile Send private message Send e-mail
Gene Tani


From:
Pac NW
Post  Posted 24 Nov 2021 10:23 pm    
Reply with quote

I did some searching because I certainly have trouble holding any kind of bar in summer when I'm sweating. Here's some previous threads, varied solutions with bar mods on bullet and dobro/reso type bars

https://bb.steelguitarforum.com/viewtopic.php?p=2752215

https://bb.steelguitarforum.com/viewtopic.php?t=365659

https://bb.steelguitarforum.com/viewtopic.php?t=359949
_________________
- keyless Sonny Jenkins laps stay in tune forever!; Carter PSG
- The secret sauce: polyester sweatpants to buff your picks, cheapo Presonus channel strip for preamp/EQ/compress/limiter, Diet Mountain Dew
View user's profile Send private message Send e-mail
D Schubert

 

From:
Columbia, MO, USA
Post  Posted 25 Nov 2021 7:28 am    
Reply with quote

I know it's blasphemy, but a large grooved bar (Dobro, Stevens, Shubb, etc) is easier for me to hold and control than a round one. I'm using the same RR-2 tone bar for lap steel, respohonic, and pedal steel these days.
View user's profile Send private message Send e-mail
Eric Dahlhoff


From:
Point Arena, California
Post  Posted 25 Nov 2021 11:15 pm     heat
Reply with quote

My hands ache too. The best for me is to warm up the bar. A few seconds in a cup of hot water, dry it off and it's like therapy for my left hand.
Gotta figure out a way to warm up my right hand now...
_________________
"To live outside the law you must be honest." (Bob Dylan)
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron