| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Changing strings on Gold Tone LS-8
Reply to topic
Author Topic:  Changing strings on Gold Tone LS-8
Ron Hall


From:
Montpelier, VA
Post  Posted 25 Oct 2021 11:02 am    
Reply with quote

I recently acquired a Gold Tone LS-8 and when I went to change the strings I noticed that I couldn't keep the ball end of the strings from popping out of the bridge slots. It seems like I need a 3rd hand. I was able to do it but it was a major hassle. Any tips/suggestions that would make the process easier?
View user's profile Send private message Send e-mail
Brooks Montgomery


From:
Idaho, USA
Post  Posted 25 Oct 2021 12:04 pm    
Reply with quote

You might try jamming a Q-Tip in there while you are tuning (if there is enough space). It works well on dobros and other instruments.
_________________
A banjo, like a pet monkey, seems like a good idea at first.
View user's profile Send private message Send e-mail
Jack Hanson


From:
San Luis Valley, USA
Post  Posted 25 Oct 2021 12:27 pm    
Reply with quote

The rubber wedges used for piano tuning sometimes come in handy:

I use 'em (without the wire handle) for string changes on my push/pulls.
View user's profile Send private message Send e-mail
Guy Cundell


From:
More idle ramblings from South Australia
Post  Posted 25 Oct 2021 8:26 pm    
Reply with quote

Bluetack

View user's profile Send private message Send e-mail Visit poster's website
Brian Evans

 

From:
Nova Scotia, Canada
Post  Posted 31 Oct 2021 6:39 am    
Reply with quote

I woulda done something with a magnet, I think. Usually I can tape the ball ends into where they need to be, but I don't think that would work in this case. A magnet on the base plate leaning against the tailpiece, assuming something in there is ferrous.
View user's profile Send private message Send e-mail
Zach Lattin

 

From:
Washington, USA
Post  Posted 2 Nov 2021 8:51 am    
Reply with quote

I have owned a Gold Tone 8-string and agree that that bridge is a pain for changing strings. I don't know if you've tried this already, but removing the decorative cover / "palm rest" helps you get your hands down closer to where the ball-ends are supposed to catch. It's three or four Phillips screws to get that palm rest off, and removing them doesn't cause anything else on the guitar to come off in my experience. Hope that helps someone out there!
View user's profile Send private message
Ron Hall


From:
Montpelier, VA
Post  Posted 2 Nov 2021 9:28 am    
Reply with quote

Yeah, I removed the palm rest. I'm going to try the blu-tack suggestion when I get a chance. I'll post my results.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron