| Author |
Topic: Looking to buy rubber feet for pak-a-seat |
Bob Metzger
From:
Waltham (Boston), MA, USA
|
Posted 15 Oct 2021 8:37 am |
|
Hi All,
I'm in need of a few of the rubber feet the go into the ends of the tubular legs of a pak-a-seat. My tubular legs on my seat are 1" diameter so I guess the inner diameter is probably something like 7/8" or 15/16". If anyone knows who might have these to sell, I would appreciate it if you could send that info along.
Thanks,
Bob M.
_________________
Bob M. |
|
|
 |
Mark Shuda
From:
Wisconsin, USA
|
Posted 15 Oct 2021 8:51 am leg rubbers
|
|
You can buy these in white or black at any hardware store for around $2.00
_________________
Mark Twang |
|
|
|
Bob Metzger
From:
Waltham (Boston), MA, USA
|
Posted 15 Oct 2021 8:54 am
|
|
Except my local hardware store (not the best one, unfortunately).
Bob M.
_________________
Bob M. |
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
Posted 15 Oct 2021 8:57 am
|
|
Steeler's Choice seat company.
Jerry van Hoose also posted in his sho bud seat thread that he has some of these too. Search 'em out. |
|
|
|
David Nugent
From:
Gum Spring, Va.
|
Posted 15 Oct 2021 10:53 am
|
|
| Bob..Walmart generally stocks rubber feet in various sizes. (However, after reading your post more closely, are you actually looking for the end plugs?) |
|
|
|
Bob Metzger
From:
Waltham (Boston), MA, USA
|
Posted 16 Oct 2021 8:58 am
|
|
Yes, you guys are right; my search was not inclusive enough. I used to live in Los Angeles which has so many really great hardware stores (think aircraft industries) but where I'm at now it's less so. I just have to search around more.
End plugs is probably the correct nomenclature. I guess I said feet because they are on the bottom, in contact with the ground or floor. After a busy summer playing, I'm just going thru things now, fixing this and that, and getting ready for the phone to ring.
Bob M.
_________________
Bob M. |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 16 Oct 2021 9:40 am
|
|
The "end plugs" in my Steelers Choice seat are plastic, not rubber. They tend to slide too easy on non-carpeted stages. I bought 4 rubber crutch tips and put them on the ends of the legs as "feet". No more slippy-slidey.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|
Denny Turner
From:
Oahu, Hawaii USA
|
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 23 Oct 2021 3:28 am
|
|
They don't present any problem in folding the legs in on my Steelers Choice seat. They do however, stick a little past the bottom edge of the seat slightly. Not a problem though.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|
)
