| Author |
Topic: Foam Used Between Undercarriage Rods. |
Kenneth Kotsay
From:
Davie/Ft Lauderdale, Florida
|
Posted 16 Sep 2021 12:24 pm |
|
Where can you buy the foam that is inserted between the rods and cross shafts that muffle the rattling of these rods?
I tried, Home Depot, Lowes, Wal-mart, Hobby stores, Art supplies stores, Bath & Beyond, Michael's etc.,
no foam pads or products at all.
This foam is used in packing, like expensive glass ware, computer parts, etc.
Buddy my cat destroyed the foam that was under my 2019 MSA Legend!!!!!!!!! |
|
|
 |
Roger Rettig
From:
Naples, FL
|
Posted 16 Sep 2021 12:44 pm
|
|
My wife works in fabric retail. She tells me that, currently, all varieties of foam (it's needed when they reupholster furniture) are extremely hard to come by.
It's covid-related - containers are backed-up everywhere and all sorts of supplies are, consequently, in short supply. Shipping costs have ballooned, too, which isn't helping.
_________________
Roger Rettig: Emmons D10, B-bender Teles, Martins, and a Gibson Super 400!
---------------------------------- |
|
|
|
Don Poland
From:
Hanover, PA.
|
Posted 18 Sep 2021 4:17 am
|
|
| Maybe try your local shipping store. (UPS, FEDEX...etc...) |
|
|
|
David Nugent
From:
Gum Spring, Va.
|
Posted 18 Sep 2021 6:00 am
|
|
| You might try a fabric store such as, 'JoAnns'. Most carry foam material in varying thicknesses used for making throw pillows. |
|
|
|
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 18 Sep 2021 6:06 am
|
|
New foam is sometimes hard to find. And even when you do find it, it's ridiculously expensive nowadays. Go to a second-hand store and buy an old foam pillow or bolster for $3-$5 and you'll have all you need.  |
|
|
|
Roger Rettig
From:
Naples, FL
|
Posted 18 Sep 2021 6:11 am
|
|
My in point my earlier post was that even fabric outlets are struggling to keep foam in stock. At the business where my wife works, they're having to turn some upholstering work away.
_________________
Roger Rettig: Emmons D10, B-bender Teles, Martins, and a Gibson Super 400!
----------------------------------
Last edited by Roger Rettig on 18 Sep 2021 8:34 am; edited 1 time in total |
|
|
|
Mark McCornack
From:
California, USA
|
Posted 18 Sep 2021 7:43 am
|
|
A couple of times I've had good luck with obtaining remnants from a local upholstery shop which I use as packing material for shipping. This actually turned out to be a symbiotic relationship, as small scrap pieces are just a disposal nuisance to the upholsterer. Especially since you are looking for such a small quantity, I'd recommend trying this route.
I hope this helps.  |
|
|
|
John De Maille
From:
On a Mountain in Upstate Halcottsville, N.Y.
|
Posted 18 Sep 2021 8:58 am
|
|
Ken,
PM me your address. I think I have some extra foam that I'll send to you. |
|
|
|
Chris Templeton
From:
The Green Mountain State
|
|
|
|
Kenneth Kotsay
From:
Davie/Ft Lauderdale, Florida
|
Posted 21 Sep 2021 12:53 pm
|
|
Found the foam. Home Deport has these foam filters used in wet/dry shop vacuum canisters.
The product is called, MULTIFIT Replacement filters. #VF2001. Cost is, $5.97. You find them where all the Rigid wet/dry vacuums are located.
I tired one of these filters and they worked, in fact they are thin to some degree but it works, you first cut the filter forming into one long sheet. The thickness under 1/2 inch. You can cut it into strips to your desire length and then weave it through the rods. It cushions the rattling of the rods. It s like sound proofing.
I till can't find is that yellow soft foam, the foam itself is very fine in texture. |
|
|
|
Scott Baumann
From:
Wisconsin, USA
|
Posted 23 Sep 2021 11:33 am
|
|
| I bought a pack of scrubbies at the grocery store and cut the foam out of the nylon bag. Worked great. |
|
|
|
John Hyland
From:
South Australia
|
Posted 23 Sep 2021 9:31 pm
|
|
| Chris Templeton wrote: |
My Sierra's have these nice foamish rod coverings:
 |
I wonder where you get those. And what do they do as they pass a bellcrank on the same changer? |
|
|
|
