| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Guyatone (Fender Deluxe 8 copy) pickup question
Reply to topic
Author Topic:  Guyatone (Fender Deluxe 8 copy) pickup question
Jan Oelbrandt

 

From:
Herzele, Belgium
Post  Posted 10 Sep 2021 7:38 am    
Reply with quote

I recently picked up this (? 60ies) Guyatone 8-string console. The thing seems to be well built, stays in tune, etc etc but the pickups don't sound good. I have other 8st pups laying around, so I'd wanna try some in there. But... I can't figure out how they're attached to the body. Could it be they're glued in there? There's not a screw to be seen. Nothing on the underside too. I've tried gently with a screwdriver to flip'em out, nothing's moving. Posting here in case somebody has previous experiences. Help me out here before I break something Winking
[/img]
_________________
MSA U12 (uni C6), '71 &'73 Emmons PP, Fender '56 Champion lap steel, custom build Weissenborn. Johnson, Mattelin & '31 Regal resonators, MusicMan RD65 or Quilter head through a 12" Jensen (psg), MusicMan 65 amp (lap). Daddy Slide tonebar
View user's profile Send private message Send e-mail Visit poster's website
Jeff Highland

 

From:
New South Wales, Australia
Post  Posted 10 Sep 2021 12:22 pm    
Reply with quote

No experience with these but perhaps the claw is screwed in place and the bobbin glued into it?
_________________
Duesenberg Fairytale
1949 Supro Supreme
1950 National New Yorker
2008 Highland Baritone Weissenborn
2020 Highland New Yorker.
2020 Highland Mohan Veena
2021 Highland Weissencone
View user's profile Send private message Send e-mail
Dennis Saydak


From:
Manitoba, Canada
Post  Posted 10 Sep 2021 1:25 pm    
Reply with quote

Tagged for interest as my double neck Guy has the same pickups.
_________________
Dennis
Just when you think you're getting ahead in the rat race, the rats get faster.
View user's profile Send private message Send e-mail
David Devlin

 

From:
New Mexico, USA
Post  Posted 10 Sep 2021 6:44 pm    
Reply with quote

Jan

I removed these pickups years ago. I believe they were screwed down. There are two screws on the bottom of the jagged "claw" . to get to them the black cover comes off. I believe it just lifts off. Then the bobbin comes off. It may be glued but comes up easy...at least i was able to do it. Then you can access the screws and take the claw off.
View user's profile Send private message Send e-mail
Nick Fryer


From:
Ohio, USA
Post  Posted 11 Sep 2021 5:44 am    
Reply with quote

I recently restored one of these for a forum member. The claw screws down into the body but the pickups just sit inside the claw and then the cover goes over top and holds everything in there. Yours are probably “glued” “stuck” from years of gunk and just need to be gently loosened and removed. Try and clean any gunk away in the seem between the cover and the claw and they should pull up. You can’t really break it so don’t worry about it. Let me know if you need more help.
_________________
www.fryerguitarpickups.com
View user's profile Send private message Send e-mail Visit poster's website
Nick Fryer


From:
Ohio, USA
Post  Posted 11 Sep 2021 6:17 am    
Reply with quote



Here’s a picture of the repro bobbin I made for the guitar. This is to show how it all goes together. I wax potted the pickup w the cover on so it’s all stuck together and then it just sits inside the claw. You could use some foam double sided tape on the bottom of the bobbin if needed or melt some wax inside the cover and then stick the bobbin inside and it will hold.
_________________
www.fryerguitarpickups.com
View user's profile Send private message Send e-mail Visit poster's website
Jan Oelbrandt

 

From:
Herzele, Belgium
Post  Posted 11 Sep 2021 7:13 am    
Reply with quote

Thanks everybody, successfully removed 1 old PU & installed a new one. Pics and video proof bound to follow. You're the best!
_________________
MSA U12 (uni C6), '71 &'73 Emmons PP, Fender '56 Champion lap steel, custom build Weissenborn. Johnson, Mattelin & '31 Regal resonators, MusicMan RD65 or Quilter head through a 12" Jensen (psg), MusicMan 65 amp (lap). Daddy Slide tonebar
View user's profile Send private message Send e-mail Visit poster's website
Jan Oelbrandt

 

From:
Herzele, Belgium
Post  Posted 12 Sep 2021 11:04 pm    
Reply with quote

Here's some photos of the removal of one PU, and installation of a new one (actually a Fender Jazz Bass pu). The oddest thing about the original pu is that the magnets just sit loosely in there. After removal of the cover I just could take them out one by one. Hi-res versions available if somebody needs them.








_________________
MSA U12 (uni C6), '71 &'73 Emmons PP, Fender '56 Champion lap steel, custom build Weissenborn. Johnson, Mattelin & '31 Regal resonators, MusicMan RD65 or Quilter head through a 12" Jensen (psg), MusicMan 65 amp (lap). Daddy Slide tonebar
View user's profile Send private message Send e-mail Visit poster's website
James Kerr


From:
Scotland, UK
Post  Posted 15 Sep 2021 12:25 pm    
Reply with quote

Here is my Guyatone D8 playing some time ago.

https://www.youtube.com/watch?v=pWVll5SxZ7M

James Kerr
Scotland.
View user's profile Send private message Send e-mail
Jan Oelbrandt

 

From:
Herzele, Belgium
Post  Posted 20 Sep 2021 1:28 am    
Reply with quote

James Kerr wrote:
Here is my Guyatone D8 playing some time ago.

https://www.youtube.com/watch?v=pWVll5SxZ7M

James Kerr
Scotland.

I can't watch it, James. Message saying that video is set to private
_________________
MSA U12 (uni C6), '71 &'73 Emmons PP, Fender '56 Champion lap steel, custom build Weissenborn. Johnson, Mattelin & '31 Regal resonators, MusicMan RD65 or Quilter head through a 12" Jensen (psg), MusicMan 65 amp (lap). Daddy Slide tonebar
View user's profile Send private message Send e-mail Visit poster's website
Jan Oelbrandt

 

From:
Herzele, Belgium
Post  Posted 20 Sep 2021 1:38 am    
Reply with quote

This is me playing it, just some jazz licks and chords in A6 tuning

https://youtu.be/LRLCqBbueUU
_________________
MSA U12 (uni C6), '71 &'73 Emmons PP, Fender '56 Champion lap steel, custom build Weissenborn. Johnson, Mattelin & '31 Regal resonators, MusicMan RD65 or Quilter head through a 12" Jensen (psg), MusicMan 65 amp (lap). Daddy Slide tonebar
View user's profile Send private message Send e-mail Visit poster's website
James Kerr


From:
Scotland, UK
Post  Posted 20 Sep 2021 1:53 am    
Reply with quote

Jan Oelbrandt wrote:
James Kerr wrote:
Here is my Guyatone D8 playing some time ago.

https://www.youtube.com/watch?v=pWVll5SxZ7M

James Kerr
Scotland.

I can't watch it, James. Message saying that video is set to private


I did have it public for a week or so then took it down again along with all my other content, You Tube wants to put adverts on my Channel and Tax me at source, I won't allow that, sorry.

James Kerr
View user's profile Send private message Send e-mail
Jan Oelbrandt

 

From:
Herzele, Belgium
Post  Posted 20 Sep 2021 2:01 am    
Reply with quote

James Kerr wrote:
You Tube wants to put adverts on my Channel and Tax me at source

Right you are...

Sorry I missed your video. Last week was pretty busy.
_________________
MSA U12 (uni C6), '71 &'73 Emmons PP, Fender '56 Champion lap steel, custom build Weissenborn. Johnson, Mattelin & '31 Regal resonators, MusicMan RD65 or Quilter head through a 12" Jensen (psg), MusicMan 65 amp (lap). Daddy Slide tonebar
View user's profile Send private message Send e-mail Visit poster's website
James Kerr


From:
Scotland, UK
Post  Posted 20 Sep 2021 2:23 am    
Reply with quote

Jan Oelbrandt wrote:
James Kerr wrote:
You Tube wants to put adverts on my Channel and Tax me at source

Right you are...

Sorry I missed your video. Last week was pretty busy.


Just for you I will put it back up. Watch out for it soon.
View user's profile Send private message Send e-mail
Jan Oelbrandt

 

From:
Herzele, Belgium
Post  Posted 20 Sep 2021 3:43 am    
Reply with quote

James Kerr wrote:

Just for you I will put it back up. Watch out for it soon.

I saw it, thanks. That's a really nice tune to play on a steel guitar.
_________________
MSA U12 (uni C6), '71 &'73 Emmons PP, Fender '56 Champion lap steel, custom build Weissenborn. Johnson, Mattelin & '31 Regal resonators, MusicMan RD65 or Quilter head through a 12" Jensen (psg), MusicMan 65 amp (lap). Daddy Slide tonebar
View user's profile Send private message Send e-mail Visit poster's website
Carl McLaughlin


From:
St.Stephen,New Brunswick,Can
Post  Posted 28 Sep 2021 8:04 am     Guyatone
Reply with quote

Anyone have pictures of a Guyatone double neck 6 string.I have a chance to pick one up,don't know the model or year.

Carl Smile
_________________
I have a Tele plus telecaster, Larrivee acoustic. Also have a Fender resonator guitar with new Quarterman cone and spider, and an Allan tailpiece .Playing through a Fender Super Champ XD, using a little delay on the amp and a Harmonix Holy Grail Echo pedal, set on Hall turned to about 1pm.Just Bought a Yamaha FGX5 Recently and love it. Recently got a Sho-NUFF 6 string pedal steel in open G.Still learning.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron