| Author |
Topic: keyless guitar tuning heads |
Johnny Cox
From:
Williamsom WVA, raised in Nashville TN, Lives in Hallettsville Texas
|
Posted 19 Jul 2021 1:49 pm |
|
I'm seriously considering getting myself an S12 keyless to carry in the truck with me. Let's see your keyless guitars and tell me what you like or dislike about them. Im really curious about the tuning heads and how they work.
_________________
Johnny "Dumplin" Cox
"YANKIN' STRINGS & STOMPIN' PEDALS" since 1967.
Last edited by Johnny Cox on 28 Jul 2021 7:30 pm; edited 2 times in total |
|
|
 |
James Sission
From:
Sugar Land,Texas USA
|
Posted 19 Jul 2021 1:55 pm
|
|
It's shorter than a keyed guitar, it's light, it stays in tune very well and changing strings is super easy and fast. |
|
|
|
Ian Rae
From:
Redditch, England
|
Posted 19 Jul 2021 3:38 pm
|
|
This question has been asked a few times already.
I have a (non-pink) Williams and an Excel, either of which I would recommend as both makers have achieved very light instruments without compromising the sound or playability in any way.
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs |
|
|
|
David Ball
From:
North Carolina High Country
|
Posted 19 Jul 2021 4:38 pm
|
|
I don't have it any more, but here is the Excel I had. Great guitar. Light weight, stayed in tune, didn't break strings. Very nice action.
Everything was a little tight under the hood--a little hard for big hands to work on, but the engineering and excecution were top notch.
I sold it because as nice as it was, it just didn't match up with my Sho Bud Permanents in tone or general feeling. It was a lot more precise, and a heck of a lot lighter, but it didn't make me feel as good as the perms. But I don't play out, so weight isn't a big consideration. And I play pretty 60's style, and am not particularly interested in getting modern, so the old perms are perfect for me.
The Excel is a splendid guitar though.
Dave |
|
|
|
Glenn Demichele
From:
(20mi N of) Chicago Illinois, USA
|
Posted 19 Jul 2021 7:06 pm
|
|
+1 on the Excel. I had a 12 E9-C6 (Greg C has it now) which was absolutely wonderful but I couldn't get used to the 12 string grips. I sold it to Greg and got a keyless Superb D10 which I also love.
_________________
Franklin D10 8&5, Excel D10 8&5. Both amazing guitars! Homemade buffer/overdrive with adjustable 700Hz "Fender" scoop., Moyo pedal, GT-001 effects, 2x TDA7294 80W class AB amps, or 2x BAM200 for stereo. TT12 and BW1501 each in its own closed back wedge. Also NV400 etc. etc... |
|
|
|
Jeremy Threlfall
From:
now in Western Australia
|
Posted 19 Jul 2021 8:46 pm
|
|
ive got a U10 Anapeg (4x5) ive been playing a fair bit at home recently. it took me a while to get used to the empty space where the keyhead should be, but now i am used to it, and i actually visualise a phantom keyhead to get my perspectives right. Its a compact unit (its amazing how much difference that extra few inches makes!) and its easier to fine tune than with traditional keys.
_________________
Luke Drifter on Facebook
https://www.facebook.com/ralwaybell
https://www.facebook.com/jeremy.j.threlfall
http://ralwaybell.bandcamp.com/ |
|
|
|
Larry Ball
From:
Airdrie, Alberta, Canada
|
Posted 20 Jul 2021 6:22 am Great
|
|
_________________
Mullen SD10, Sho~Bud SD10 LDG, Show-Pro SD10 LDG, Peavey Nashville 112, Boss Katana 100 MK11, Telonic's F100 Multi-Taper Super Pro V/P, Wayne Brown “Custom Designed Amp” |
|
|
|
Ross Shafer
From:
Petaluma, California
|
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 20 Jul 2021 8:23 am
|
|
 |
|
|
|
James Sission
From:
Sugar Land,Texas USA
|
|
|
|
Larry Allen
From:
Kapaa, Kauai,Hawaii
|
Posted 21 Jul 2021 2:26 pm
|
|
I have several Excels..great light weight, always in tune, easy string change, these S10s are 21lbs, case is 12lbs…fits in the overhead…
_________________
Excel steels & Peavey amps,Old Chevys & Motorcycles & Women on the Trashy Side |
|
|
|
Jon Jaffe
From:
Austin, Texas
|
Posted 21 Jul 2021 6:59 pm
|
|
I have two Klines. They are working steel guitars—low or no maintenance. If you are into changing the copedant weekly, it is not for you. It is not lightweight. It does not go out of tune. In a pinch, you can wait for a break to tune it. It is easy to set up, and it is stable on the worst of stages. It is easy to change strings. I have replaced a broken string before the end of a song. They are not easy to find because people do not want to part with them.
Alternatives would be an Excel or a BMI.
 |
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 22 Jul 2021 7:47 am
|
|
| Kline steel are the cats meow! |
|
|
|
Bill Fisher
From:
Oklahoma, USA
|
Posted 22 Jul 2021 10:54 am
|
|
and ANAPEG steel is the Rolls-Royce meow.
Bill |
|
|
|
Gabriel Edell
From:
Hamilton, Ontario
|
Posted 22 Jul 2021 12:08 pm
|
|
_________________
GFI S-10 P U, Moyo Volume, Fender Steel King, Fender 5F4 Super-Amp |
|
|
|
Michael Johnstone
From:
Sylmar,Ca. USA
|
Posted 22 Jul 2021 3:12 pm
|
|
 [/img]
Excel U12 E13/B13 w/8+9 & Wallace TrueTone 17.5
Single wide. No dead weight padded fake necks around here.
Its case looks like a tenor sax case.
I like it. |
|
|
|
Johnny Cox
From:
Williamsom WVA, raised in Nashville TN, Lives in Hallettsville Texas
|
Posted 28 Jul 2021 11:14 am
|
|
Can you guys give me some detailed pictures of the tuning heads and tell me how they work?
_________________
Johnny "Dumplin" Cox
"YANKIN' STRINGS & STOMPIN' PEDALS" since 1967. |
|
|
|
Bobby D. Jones
From:
West Virginia, USA
|
Posted 28 Jul 2021 1:47 pm
|
|
Here is a start. GFI S12 Keyless head.
The fingers are L shaped, There is a threaded shaft/Bolt that runs from Tuning Knob to one end of the L shaped finger. As the rod is lengthened with the knob, The end with the string attached is pulled away from the nut, There fore tightening the string. Reverse rotation of the tuning knob loosens the string. |
|
|
|
Jeremy Threlfall
From:
now in Western Australia
|
|
|
|
J D Sauser
From:
Wellington, Florida
|
Posted 30 Jul 2021 7:59 am
|
|
I like finger knobs.
The Excel and GFI have a good system... actually, so did the Gene Fields Fender PS210.
Sierra's (the aluminum Gen.). The thumbscrew version, was OK, but the early models the screw ate up the lever as it was not pivot ankered in it.
I hate the idea of having to hunt for a hex-tuner to touch up a tuning.
I tried to talk Bud Carter (and John Fabian) into considering to build a Carter Keyless. Bud one had a harder time to control the overtones with a keyless. He and some felt that BE's tone had become too clean when he played the Sierra Crown. I felt he sounded great and cutting thru great. I love keyless guitars. But I own a new MSA which along with my (Carl Dixon's) Excel Superb is the best sounding PSG I have ever bought. The MSA has a keyhead and the Excel is famously Keyless.
IF I would BUILD a guitar it would definitely be keyless.
... J-D.
_________________
__________________________________________________________
Was it JFK who said: Ask Not What TAB Can Do For You - Rather Ask Yourself "What Would B.B. King Do?"
A Little Mental Health Warning:
Tablature KILLS SKILLS.
The uses of Tablature is addictive and has been linked to reduced musical fertility.
Those who produce Tablature did never use it.
I say it humorously, but I mean it. |
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
Posted 30 Jul 2021 9:12 am
|
|
There have been a couple posts about the Williams tuners, but here is an overhead shot showing the mechanism. I know Bill has made a few changes, one using top hat screws with a flange to lock the string.
The mechanism works with the tuner screw pulling the tuning block 180° to the neck. It's a bit longer unit than some others. Uses the same tuning wrench as pedals.
The keyless Williams is the most tote friendly guitar I ever owned. Compact size and lightweight but solid feel.
My favorite is the one Lamar Colvin devised for his guitars. It's a tiny unit, probably less than 2 in., and pulls the tuning block at 90°. Uses an allen wrench. One of those dual function wrenches that Michael Yahl sells works great. I think Lamar has closed up shop now though. Perhaps the new Sierra is similar.
 |
|
|
|
Darren Mortillaro
From:
Nevada, USA
|
Posted 30 Jul 2021 3:15 pm
|
|
| Are keyless generally better at staying in tune? I have a knee lever on my BMI that never returns to pitch. I have to sharpen the same string with a pedal in order to bring it back in tune. |
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 31 Jul 2021 5:46 am
|
|
Zane Beck an Zane King keyless steel history.
 |
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 18 Jan 2022 8:39 am A
|
|
Here's a Excel Keyless
A customer ordered with a Excel key model body with the first pedal starting the same as a key model.
This would be my choice for good ergonomics..
 |
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 18 Jan 2022 10:47 am
|
|
Nice push pull BMI.
Last edited by Johnie King on 18 Jan 2022 10:48 am; edited 1 time in total |
|
|
|
