| Author |
Topic: Lubricating Changers |
Tony Edwards
From:
Six Mile, South Carolina
|
Posted 29 Jun 2021 5:48 am |
|
What is the proper way to lube the changers on a pedal steel. I don't see any way anything can "seep" between the tightly placed changers. Do I pour from the top or do I turn it over and pour from the bottom? Thanks in advance for your input.
_________________
ZumSteel SD10; CLR Custom SD10; Telonics 500-B w/ TT 15; Hilton Low Profile VP; Frenchy's Steel Mill Strings; George L's Cables; BJS Tone Bars; Hoffmeyer Picks. This combination produces a Heavenly tone! Psalm 33:2 "Praise the Lord with...an instrument of ten strings." |
|
|
 |
Greg Cutshaw
From:
Corry, PA, USA
|
|
|
|
Steve Spitz
From:
New Orleans, LA, USA
|
Posted 29 Jun 2021 10:25 am
|
|
| Greg nails it. |
|
|
|
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 2 Jul 2021 6:33 pm Re: Lubricating Changers
|
|
| Tony Edwards wrote: |
| I don't see any way anything can "seep" between the tightly placed changers. Do I pour from the top or do I turn it over and pour from the bottom? Thanks in advance for your input. |
No, never "pour" anything!  As the song goes..."just a little goes a long way". Capillary action will "pull" oil (or any liquid) into incredibly small spaces. That's why I prefer liquid lubricants instead of dry lubricants, which cease to migrate once their vehicle has evaporated. Any good lubricant should be used sparingly; once every year or two. I prefer synthetic sewing machine oil or gun oil myself, but anything is better than nothing. |
|
|
|
Steve Mueller
From:
Cincinnati, Ohio, USA
|
Posted 2 Jul 2021 7:44 pm
|
|
Good info. Maintenance is critical.
_________________
2016 Williams D12 8 x 8, 2015 Williams D12 8 x 8, 2023 Williams S12 4 x 5, Milkman Amps, 1974 Gibson Byrdland |
|
|
|
Johnny Baker
From:
Southport, Fla
|
Posted 7 Jul 2021 8:20 pm
|
|
You can't beat the lubricant that Greg is telling you to use. I am a professional locksmith with over 23 years in the business and Tri-Flow is the the stuff. In my opinion, Rem-Oil is the next best thing to it, if you can't find Tri-Flow. |
|
|
|
Bobby Bonds Sr.
From:
Texas, USA
|
Posted 9 Jul 2021 1:06 pm
|
|
| I like a drop of Marvel Mystery Oil |
|
|
|
Peter Harris
From:
South Australia, Australia
|
Posted 10 Jul 2021 3:07 am
|
|
| Bobby Bonds Sr. wrote: |
| I like a drop of Marvel Mystery Oil |
...probably tastes better with a bit of soda, though....
_________________
If my wife is reading this, I don't have much stuff....really! |
|
|
|
Scott Spanbauer
From:
Boulder, Colorado, USA
|
Posted 12 Jul 2021 5:37 pm
|
|
I learned about Tri-Flow from my kids, who are (now adult) skateboarders. The received wisdom was that it was the only proper lube for wheel bearings. Clean them first with white gas, then lube with Tri-Flow and you're good for a long time.
I have yet to do this on any of my changers, but I wonder whether or with what to clean the changer before applying the Tri-Flow. My experience with typewriters tells me: Naphtha. Not sure I want to pour white gas into a changer.
_________________
Carter D10, Emmons GS10, T8 Stringmaster, 50s Fender Deluxe
johnnyblueheart.com |
|
|
|
