Zum Encore

James Taylor · From: United Kingdom

I have owned my Zum Encore for a few years now and this excellent guitar came with AGWIRE strings. I have found them the perfect string and I believe they are being used much today by steel guitarists. The service and tone provided by these strings are remarkable. To this date, I have had only one break!

However, there are new STAGE ONE strings on the market for these guitars and I just wondered what was the opinion on them? Have they the same service and tone and does breakage occur more frequently? I would welcome any advice there is on this.

Thanking everyone for advice and comment

JAMES TAYLOR BACK WOODS OF SCOTLAND

Gene Tani · From: Pac NW

Wound 6th vs plain

https://www.stringsandbeyond.com/daddario-pedal-steel-nyxl1238ps.html

https://www.steelguitarshopper.com/e9th-wound-6th-for-stage-one/
_________________
- keyless Sonny Jenkins laps stay in tune forever!; Carter PSG
- The secret sauce: polyester sweatpants to buff your picks, cheapo Presonus channel strip for preamp/EQ/compress/limiter, Diet Mountain Dew

Erv Niehaus · From: Litchfield, MN, USA

That's JAGWIRE strings.
Erv

Al Evans · From: Austin, Texas, USA

James Taylor · From: United Kingdom

Thank you, Gene, Al and ERV. Aye, and of course you are right ERV it is JAGWIRE I must have fallen into one of my daily dazes again- over eighty now you know ERV.
I am still ploughing through that magnificent music of yours; great stuff and thank you for all your tremendous help. I hope you and yours are keeping well.

I will take into account all that has been said and thank you all for your views and recommendations.

BEST WISHES TO YOU ALL JAMES TAYLOR

Erv Niehaus · From: Litchfield, MN, USA

James,
Bless your heart. Very Happy

Erv

Anthony Parish · From: Austin

I spoke to Doug Earnest about replacement strings for my Zum Encore and he said, "GHS Stainless, b0b at Steel Guitar Forum website store will be glad to do those for you. Stage One set substituting a plain 020 for the wound string in the set." Or Live Steel Strings does custom sets at no extra charge, find them online.
I bought replacements through the store of this forum, and I like them. Haven't broken one yet.

Tony

James Taylor · From: United Kingdom

Hi Folks,
THANK YOU ERV FOR EVERYTHING!

Yes Tony I do know about the substitutes but I just wondered if they were as good as the Jagwire strings the guitar was sent out with in the first place. Jagwire tone and strength are excellent and I would not change them unless the strings were of good quality both in a rich tone and strength.

BEST WISHES JAMES TAYLOR

Doug Earnest · From: Branson, MO USA

GHS Stainless are the standard equipment string on Encores and Stage Ones.

Steven Hudson · From: North Carolina, USA

I switched to the GHS nickel strings because they fit the tone I was looking for and they have been great. You can order GHS strings from Doug Palmer too. He can be found on the forum.
_________________
2001 Marlen S-10, 2020 Zumsteel Encore, Melbert 6 string Roundabout, Evans E250HV Amp

Erv Niehaus · From: Litchfield, MN, USA

I won't use stainless strings. Very Happy

Erv

James Taylor · From: United Kingdom

Hi again ERV,
What kind of strings do you use and why not the stainless strings?

JAMES TAYLOR

Erv Niehaus · From: Litchfield, MN, USA

James,
My favorite strings are the Live Steel Strings.
There are a couple or reasons I don't like stainless steel strings.
l. I don't care for the tone. I like the more mellow tone you get from nickel strings.
2. There is too much bar drag with stainless strings. Your bar slides over nickel strings a lot easier. Very Happy

Erv

Jim Cooley · From: The 'Ville, Texas, USA

James - I prefer Live Steel strings, D'Addario too. D'Addario NYXLs are more expensive than most other strings. I've found I like the Pro Steels series well enough. I also have a couple of sets of other brands.

I prefer stainless strings. I like the tone, and don't have issues with bar drag. Keep in mind that only the windings on the wound strings are stainless. However, if I needed new strings and was out of stainless, I'd put on a set of nickel wound. I wouldn't shut down just because of the strings.

Like tone, there's no right or wrong one-size-fits-all. It's personal preference. If it's right for you, it's right. I'd buy a set of each and see which you prefer. Like many of us, you'll probably find out that you prefer a particular brand. Unfortunately it costs to find out what works best for you, but it's worth it in the end. Maybe you'll find what you like with the first set or two you try.

Ken Mizell · From: Lakeland, Florida, 33809, USA

Here is a great place to buy strings -

https://www.steelguitarshopper.com/categories/Strings/

b0b, right here on The Steel Guitar Forum, has a great selection of strings, both nickel and stainless, including all the brands mentioned above, except Live Steel Strings. He also stocks the string sets specifically for the Stage One or Encore, with the wound 6th string. Buying from the forum store helps to support the Steel Guitar Forum.
_________________
Steeless.

Frank Freniere · From: The First Coast

James Taylor · From: United Kingdom

Hi everyone,
Thank you all for your remarks and I will take a few breaths first. I do like a mellow sound from the pedal steel and I will consider that first.

I certainly do not like screaming sounds on the pedal steel nor the guitar and I will have to consider very carefully before I lounge into a tone blurp and scraping sound.

I love my guitar and its sweetness and I am always looking to improve this if possible.

EVERY BEST WISH TO ALL JAMES TAYLOR

Bo Legg · Posted 31 May 2021 11:52 am

D'Addario strings all wadded up with color codes and a chart on the packaging if you haven't thrown it away is a deal breaker for me!

Chris Schlotzhauer · From: Colleyville, Tx. USA

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic