| Author |
Topic: Marlen hum solved? |
Mike Ritchie
From:
Florida, USA
|
Posted 30 Mar 2021 7:05 am |
|
| Does it seem reasonable that the tone capacitor being a bit too close to one of the pull rods was causing a hum? For the heck of it, I moved the tone capacitor just a bit to allow for a little more clearance between one of the rods that was close to it but directly impacting it and just like that the hum is mostly gone? Maybe I inadvertently affected the grounding in the process but something sure helped! |
|
|
 |
Jim Kennedy
From:
Brentwood California, USA
|
Posted 1 Apr 2021 9:17 am
|
|
I would suspect a cold solder joint first. They are not always easy to see. If it comes back flow a little solder into the solder joints. That should fix it.
_________________
ShoBud Pro 1, 75 Tele, 85 Yamaha SA 2000, Fender Cybertwin, |
|
|
|
Mike Ritchie
From:
Florida, USA
|
Posted 1 Apr 2021 1:07 pm
|
|
| Thanks, I will try that if the hum comes back. |
|
|
|
