| Author |
Topic: Pedal Steel Changer Finger ? Company and Model ? |
Rich Chinery
From:
New Jersey, USA
|
Posted 15 Mar 2021 11:42 am |
|
I have a few of these. Not sure to which pedal steel they belong . Looks like a finger that belongs to an all-pull changer. But I am not sure what company???
Any advice is appreciated!
 |
|
|
 |
Ian Worley
From:
Sacramento, CA
|
Posted 15 Mar 2021 1:00 pm
|
|
that's an Emmons PP lowering finger
_________________
All lies and jest, still a man hears what he wants to hear and disregards the rest - Paul Simon |
|
|
|
Rich Chinery
From:
New Jersey, USA
|
Posted 15 Mar 2021 1:40 pm
|
|
I was incorrect as to the similiarity of this changer finger to a PP design !
Last edited by Rich Chinery on 11 Apr 2021 2:31 pm; edited 1 time in total |
|
|
|
Rich Chinery
From:
New Jersey, USA
|
Posted 15 Mar 2021 1:47 pm
|
|
| We can either delete this post or keep it if someone would like to see what a lower finger looks like, for an Emmons PP Steel Guitar. Thank you for your help Ian! |
|
|
|
Rich Chinery
From:
New Jersey, USA
|
Posted 11 Apr 2021 2:28 pm This is not from an Emmons PP and is still a Mystery !
|
|
| I examined my changer from my Emmons PP's awhile back and thought I would update . It is completely a different design. My guess it is from an All Pull model, but not sure which company . Any clue here? |
|
|
|
Kelcey ONeil
From:
Sevierville, TN
|
Posted 11 Apr 2021 4:05 pm
|
|
| That is most certainly the lowering finger from an Emmons Push Pull, it has however been ground down in one area that would make it appear somewhat different. |
|
|
|
Rich Chinery
From:
New Jersey, USA
|
Posted 21 Apr 2021 9:33 am
|
|
| It is just that Kelsey . Not sure why it was ground down on the threaded lip or if it is still usuable like that . Thank you for the second opinion! |
|
|
|
