| Author |
Topic: Sho Bud Parts And More To Trade |
Andy DePaule
From:
Saigon, Viet Nam & Springfield, Oregon
|
Posted 6 Dec 2020 12:05 pm |
|
Just getting ready to finish the two SD-10 round front from D-10 Sho Bud conversions we started 5 years ago. The Green Steel and the Red & Blond Steel.
I'm needing 2 hole pullers & shafts. Willing to trade or buy if the price is right.
I have three extra back end plates we had cast for the conversions that do not have the C6th hole in them. I always thought it looked bad to have that large tuning hole from the C6th left behind.
I also have a whole bunch of cast Keyheads, Pedals and Changer blocks from Pedal Master guitars.
These are what I have to trade...
These are the three End Plates I Have already threaded for the legs to trade:
These are the Pedal Master parts I have to trade. I have a lot of these:
The pedals are Drilled & Tapped for the ball joints. The keyheads need final trimming. All are nice castings that need sanding and polishing.
The parts I need are Sho Bud, 16 two hole pullers with the brass fitting and shafts. 8 for pedals and 8 with the tab for knee levers to finish two steels with 4&4.
I'd also consider pull racks from an older model if in good condition though I'd prefer to go to the two hole ones for lighter weight.
I have plenty of the tuner barrels.
These are what I’m wanting to get in decent condition. Two need to be reversing for KLR & RKR:
These are the quilted maple conversions we started 5 years ago and I need to get them done:
_________________
Inlaid Star Guitar 2006 by Mark Giles. SD-10 4+5 in E9th; http://luthiersupply.com/instrument-gallery.html
2017 Mullen SD-10, G2 5&5 Polished Aluminum covering. Custom Build for me. Great Steel.
Clinesmith Joaquin Murphy style Aluminum 8 String Lap Steel Short A6th.
Magnatone Jeweltone Series Lap Steel, Circa 1950? 6 String with F#minor7th Tuning.
1956 Dewey Kendrick D-8 4&3, Restoration Project.
1973 Sho~Bud Green SD-10 4&5 PSG, Restoration Project.
Last edited by Andy DePaule on 17 Dec 2020 4:44 pm; edited 2 times in total |
|
|
 |
Andy DePaule
From:
Saigon, Viet Nam & Springfield, Oregon
|
Posted 10 Dec 2020 6:57 pm One less end plate
|
|
One less end plate. Traded that today for a few of the parts I need.
Still need more!. 
_________________
Inlaid Star Guitar 2006 by Mark Giles. SD-10 4+5 in E9th; http://luthiersupply.com/instrument-gallery.html
2017 Mullen SD-10, G2 5&5 Polished Aluminum covering. Custom Build for me. Great Steel.
Clinesmith Joaquin Murphy style Aluminum 8 String Lap Steel Short A6th.
Magnatone Jeweltone Series Lap Steel, Circa 1950? 6 String with F#minor7th Tuning.
1956 Dewey Kendrick D-8 4&3, Restoration Project.
1973 Sho~Bud Green SD-10 4&5 PSG, Restoration Project. |
|
|
|
David Mitchell
From:
Tyler, Texas
|
Posted 10 Dec 2020 8:50 pm
|
|
| Looks like MCI parts to me. Pedalmaster must have found the molds to MCI parts. Good looking bodies you got there! |
|
|
|
Andy DePaule
From:
Saigon, Viet Nam & Springfield, Oregon
|
Posted 10 Dec 2020 10:08 pm Could be?
|
|
| David Mitchell wrote: |
| Looks like MCI parts to me. Pedalmaster must have found the molds to MCI parts. Good looking bodies you got there! |
Could be? I was told that several companies shared the same moulds for their parts, but I don't now remember which ones they were.
Andy
_________________
Inlaid Star Guitar 2006 by Mark Giles. SD-10 4+5 in E9th; http://luthiersupply.com/instrument-gallery.html
2017 Mullen SD-10, G2 5&5 Polished Aluminum covering. Custom Build for me. Great Steel.
Clinesmith Joaquin Murphy style Aluminum 8 String Lap Steel Short A6th.
Magnatone Jeweltone Series Lap Steel, Circa 1950? 6 String with F#minor7th Tuning.
1956 Dewey Kendrick D-8 4&3, Restoration Project.
1973 Sho~Bud Green SD-10 4&5 PSG, Restoration Project. |
|
|
|
David Mitchell
From:
Tyler, Texas
|
Posted 11 Dec 2020 1:06 am
|
|
Nothing wrong with MCI/EMCI parts. One of the best sounding/operating pedal steels that's ever been built in mine and others opinions. Emmons loved his. I liked them so much I still have 3 of them. Parts like those are interchangeable with other steels. Changer fingers can still be purchased for those MCI changer housings. Usually if there is any changer incompatibility the stop plate just needs relocating. Easy fix. I know how to make them work with any body. Keyheads are almost 100% substitute on any steel except keyless bodies.
Good parts for steel builders or as replacements. |
|
|
|
Andy DePaule
From:
Saigon, Viet Nam & Springfield, Oregon
|
Posted 17 Dec 2020 4:38 pm Two Ring Pullers
|
|
I now only wanting to trade for or buy two ring pullers.
Need enough complete for a 4 & 4 SD-10
_________________
Inlaid Star Guitar 2006 by Mark Giles. SD-10 4+5 in E9th; http://luthiersupply.com/instrument-gallery.html
2017 Mullen SD-10, G2 5&5 Polished Aluminum covering. Custom Build for me. Great Steel.
Clinesmith Joaquin Murphy style Aluminum 8 String Lap Steel Short A6th.
Magnatone Jeweltone Series Lap Steel, Circa 1950? 6 String with F#minor7th Tuning.
1956 Dewey Kendrick D-8 4&3, Restoration Project.
1973 Sho~Bud Green SD-10 4&5 PSG, Restoration Project. |
|
|
|
Andy DePaule
From:
Saigon, Viet Nam & Springfield, Oregon
|
Posted 3 Jan 2021 6:47 pm To the top
|
|
TTT, Parts still needed 
_________________
Inlaid Star Guitar 2006 by Mark Giles. SD-10 4+5 in E9th; http://luthiersupply.com/instrument-gallery.html
2017 Mullen SD-10, G2 5&5 Polished Aluminum covering. Custom Build for me. Great Steel.
Clinesmith Joaquin Murphy style Aluminum 8 String Lap Steel Short A6th.
Magnatone Jeweltone Series Lap Steel, Circa 1950? 6 String with F#minor7th Tuning.
1956 Dewey Kendrick D-8 4&3, Restoration Project.
1973 Sho~Bud Green SD-10 4&5 PSG, Restoration Project. |
|
|
|
Brian Henry
|
Posted 12 Oct 2024 2:56 am MCI changer parts listed as pedalmaster
|
|
Hi Andy , do you still have one of those mci. Changer parts for sale. Thank you
Brian
_________________
LOOKOUT MOUNTAIN GEORGIA |
|
|
|
Michael Yahl
From:
Troy, Texas!
|
|
|
|
