| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Sap(py) gig - any suggestions
Reply to topic
Author Topic:  Sap(py) gig - any suggestions
Marc Friedland


From:
Fort Collins, CO
Post  Posted 10 Jun 2006 1:02 pm    
Reply with quote

Some of you may remember my post about a year ago regarding the attack of billions of bugs during a gig. This year at the same County Fair, a different scenario happened.
The trees above the stage were dripping sap continuously throughout the gig.
By the end of the night my pedal steel and electronic keyboards were extremely sticky from the stuff. Regarding the strings, that's an easy fix, just change them.
But how about the keys on the keyboard and the apron and fretboard on the steel.
Can I just use some Windex kind of product and try to wipe it off? I'm quite ignorant about these kinds of things - any suggestions?
Thanks,
Marc
View user's profile Send private message Send e-mail Visit poster's website
Tony Prior


From:
Charlotte NC
Post  Posted 10 Jun 2006 2:03 pm    
Reply with quote

well my take is short and simple..

It's one thing to have a bad gig, bad crowd, not play songs that they wanna hear..nobody dances, they say the band is too loud etc..

but it's yet another when Instruments are at risk...

like SAP falling on them..

and the Band members...

for me..it would be a NO GIG, and I suspect each of my bandmates would feel exactly the same..

I think it would be wise to have the Bnadleader advise the Fair promoter of the issue and the risks at hand.

Perhaps a Tent covering the stage would be appropriate .


Crud falling from Trees onto a working Band and the Gear is not appropriate or acceptable.

You would be real lucky if a cleaner like Windex removes the Sap. Generally a strong Petroleum or Thinner based product is required

my take

t

[This message was edited by Tony Prior on 11 June 2006 at 01:53 AM.]

View user's profile Send private message Send e-mail Visit poster's website
Curt Langston


Post  Posted 10 Jun 2006 2:22 pm    
Reply with quote

Indeed! I'd be out of there so fast, it would make your head spin. Ruin your gear for a couple hundred bucks................Not me.
View user's profile Send private message
Lee Baucum


From:
McAllen, Texas (Extreme South) The Final Frontier
Post  Posted 10 Jun 2006 3:10 pm    
Reply with quote

As much as I hate the stuff, as a lubricant, WD-40 can be pretty good as a cleaner. I don't think I would want to use it on a lacquer-finished guitar, though.
View user's profile Send private message Send e-mail
Jon Light (deceased)


From:
Saugerties, NY
Post  Posted 10 Jun 2006 3:20 pm    
Reply with quote

Gaaaa! Naptha might be the ticket. (Lighter fluid). If it's a lacquer guitar, I'm gun-shy about any solvents but it's a fairly fast evaporating goo-dissolving liquid that is low on the nasty scale (compared, for instance, with lacquer thinner and other more toxic and more volatile solvents). I work with the stuff all day, every day. Not on my instruments, though. Work with good ventilation, away from kitchen pilot lights and always test a small hidden area first.
Gaaaa!
View user's profile Send private message Visit poster's website
Philip Tamarkin

 

From:
California, USA
Post  Posted 11 Jun 2006 4:59 am    
Reply with quote

3M makes a citrus-based adhesive remover that gets rid of anything sticky (even contact cement!) without damaging the finished surface - we've used it successfully on all kinds of gunk with no trouble. That said, try it on an inconspicuous part of the finish first! It'll make your PSG smell like you played a gig in an orange grove. Or maybe pelted by citrus.
View user's profile Send private message Send e-mail
David Mason


From:
Cambridge, MD, USA
Post  Posted 11 Jun 2006 9:33 am    
Reply with quote

That 3M citrus stuff sounds similar to Goo-Gone, which I have used successfully on a variety of fairly valuable old fountain pen materials. You can buy a big 8 oz. bottle at Walmart and hardware stores, in the automotive department. I've even used to to remove rotted, congealed gooey foam rubber from furniture prior to refinishing. Of course, test it on an unobtrusive corner first.
View user's profile Send private message Send e-mail
Marlin Smoot


From:
Kansas
Post  Posted 11 Jun 2006 2:35 pm    
Reply with quote

Just buy a new keyboard but save the old one for "outdoor only" gigs. Use your credit card and be sure to max it out so no one else can use it.
View user's profile Send private message Send e-mail
Brendan Mitchell


From:
Melbourne Australia
Post  Posted 11 Jun 2006 5:29 pm    
Reply with quote

Eucalyptus oil sometimes removes sticky stuff and is pretty friendly to sensitive finishes.
View user's profile Send private message Send e-mail
Stephen Gambrell

 

From:
Over there
Post  Posted 11 Jun 2006 5:42 pm    
Reply with quote

We played an outdoor gig about 25 years ago, and the folks set up the food table under a big ol' oak tree. Beautiful place, lots of animals, great people, and LOTS of adult beverages...
BBQ pork on the table, served at dark. A shrill, female, VERY drunk voice says, "These birds are Sh______ing on our food!"
Obviously, none fo these great people knew of the nocturnal habits of the chickens, guineas, and turkeys running around the place.
NO INSTRUMENTS WERE HARMED DURING THIS POST!!!
View user's profile Send private message Send e-mail
Jack Francis

 

From:
Queen Creek, Arizona, USA
Post  Posted 11 Jun 2006 6:29 pm    
Reply with quote

Played a gig once at a dragstrip...After a few jet dragsters went off, our equipment was oily from the jet fuel..what a mess!
View user's profile Send private message Send e-mail Visit poster's website
Damir Besic


From:
Nashville,TN.
Post  Posted 12 Jun 2006 9:05 am    
Reply with quote

I also played once at the dragstrip...and was arrested for not wearing a pantyhose

Db



------------------

"Promat"
~when tone matters~ www.promatsteelguitars.com


View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron