| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Sonny Curtis Emmons Model??
Reply to topic
Author Topic:  Sonny Curtis Emmons Model??
Liam Sullins


From:
Brookville, Ohio
Post  Posted 10 Nov 2020 1:03 pm    
Reply with quote

Been watching some George Jones videos on YouTube and I saw Sonny playing a black Emmons, I know Sho Bud models but not Emmons. Anyone care to give the model?

_________________
'66 Sho~Bud Fingertip, Sho~Bud amps, Fenders, old cars and Tinkerin with steels!
View user's profile Send private message Send e-mail
Jeremy Reeves


From:
Chatham, IL, USA
Post  Posted 10 Nov 2020 1:41 pm    
Reply with quote

Paycheck on bass?
View user's profile Send private message Send e-mail Visit poster's website
Liam Sullins


From:
Brookville, Ohio
Post  Posted 10 Nov 2020 2:06 pm    
Reply with quote

Jeremy Reeves wrote:
Paycheck on bass?


Yup, short guy
_________________
'66 Sho~Bud Fingertip, Sho~Bud amps, Fenders, old cars and Tinkerin with steels!
View user's profile Send private message Send e-mail
Doug Jones


From:
Oregon & Florida
Post  Posted 10 Nov 2020 2:36 pm    
Reply with quote

That Emmons looks like one of the earliest. The decal may be the "Emmons Stereo". If so, probably a wrap-around. I'm guessing 1965. I know there are other forumites that could chime in (no pun intended).
View user's profile Send private message
john buffington

 

From:
Owasso OK - USA
Post  Posted 10 Nov 2020 5:14 pm    
Reply with quote

Sonny was a close personal friend of mine and Sonny told me that guitar was #3. He had tons of tuning problems with it. It was the Emmons Stereo model. The jack had two separate recessed positions to engage the stereo pick up. The pick up magnets on both necks were staggered and the volume and tone controls and neck selector was located on the left side of the top neck facing the player. It did in fact have the Emmons Stereo decal on the front. Also, it had no knee levers at that time. I think it lives in the Nashville area at this time.
View user's profile Send private message Send e-mail
Liam Sullins


From:
Brookville, Ohio
Post  Posted 11 Nov 2020 8:51 am    
Reply with quote

john buffington wrote:
Sonny was a close personal friend of mine and Sonny told me that guitar was #3. He had tons of tuning problems with it. It was the Emmons Stereo model. The jack had two separate recessed positions to engage the stereo pick up. The pick up magnets on both necks were staggered and the volume and tone controls and neck selector was located on the left side of the top neck facing the player. It did in fact have the Emmons Stereo decal on the front. Also, it had no knee levers at that time. I think it lives in the Nashville area at this time.


Never heard of a "Stereo" steel. I've heard of the Gibson 345, a stereo guitar. Shame it had tuning problems. Thanks!
_________________
'66 Sho~Bud Fingertip, Sho~Bud amps, Fenders, old cars and Tinkerin with steels!
View user's profile Send private message Send e-mail
john buffington

 

From:
Owasso OK - USA
Post  Posted 11 Nov 2020 10:45 am    
Reply with quote

Sonny indicated it required 2 separate amps to acquire the true "stereo" sound. He used Fender twins.
View user's profile Send private message Send e-mail
Jack Hanson


From:
San Luis Valley, USA
Post  Posted 11 Nov 2020 12:13 pm    
Reply with quote

https://www.youtube.com/watch?v=4Nw7jIaRDgA
View user's profile Send private message Send e-mail
Doug Palmer


From:
Greensboro, North Carolina, USA
Post  Posted 11 Nov 2020 12:47 pm     Emmons problem.
Reply with quote

I had a1964 Emmons D-10 and would agree about the tuning instability.
_________________
Emmons D-10, ST-10,LD-10 III, NV-112,Fender Deluxe Reverb. Authorized wholesale dealer musicorp.com!
View user's profile Send private message Send e-mail
Danny Letz

 

From:
Old Glory,Texas, USA 79540
Post  Posted 11 Nov 2020 2:05 pm    
Reply with quote

In that Youtube video of A 11, he appears to be activating one knee lever that hangs at a strange angle.
View user's profile Send private message Send e-mail
Herb Steiner

 

From:
Spicewood TX 78669
Post  Posted 11 Nov 2020 6:32 pm    
Reply with quote

John Buffington speaks with straight tongue. Sonny's guitar was #3 and was a "stereo." Last I heard, Mike Cass was in possession of the guitar and was restoring it, but that was several years ago.

I asked Buddy about the stereo thing. His answer was "it seemed like a good idea at the time Laughing. But it was a PITA to replace parts since it required removing the necks to do it, and I also realized that nobody I knew could afford playing through two amps. Laughing"

I have Emmons #18 and it isn't any harder to tune/set-up than any other PP I've owned, which has been way more than a few. Currently I own 5.
_________________
My rig: Infinity and Telonics.

Son, we live in a world with walls, and those walls have to be guarded by men with steel guitars. Who's gonna do it? You? You, Lt. Weinberg?
View user's profile Send private message Send e-mail Visit poster's website
john buffington

 

From:
Owasso OK - USA
Post  Posted 11 Nov 2020 6:58 pm    
Reply with quote

As far as the tuning issue: "the tuning problems I had was because of my set-up. I lower into E9th instead of raising into E. When my pedals are down I am in E, when my pedals are up, I am in A. I play backwards to everyone else." This was the amazing thing about his playing, you couldn't tell the difference. When I first saw him at Cain's (Tulsa, OK) with #3, he did spend some time tuning all the changes on the E9th neck. That was his only complaint about the Emmons. I've got a 70 and a 74 and are virtually trouble free!
View user's profile Send private message Send e-mail
Joe Goldmark

 

From:
San Francisco, CA 94131
Post  Posted 11 Nov 2020 10:09 pm    
Reply with quote

John, I had an early Emmons that I bought off of Jimmy Fox in Sacramento. One of the reasons I got rid of it was because of the tuning issues. This was in the late '70s. Wish I still owned it because I think now there are guys around who can really restore them to play much better than back then.

Joe
View user's profile Send private message Send e-mail
john buffington

 

From:
Owasso OK - USA
Post  Posted 12 Nov 2020 7:55 am    
Reply with quote

Joe you are so right, if they are set up properly tuning issue are minimal. In fact, I have less tuning issues with my p/p's than I do with some of my a/p's. Push/pull tone is by far, for my ears, superior to anything else I own.
View user's profile Send private message Send e-mail
Bruce Zumsteg

 

From:
Harrisonville, Missouri, USA
Post  Posted 12 Nov 2020 9:25 am    
Reply with quote




I took these pix at a George Jones show in the fall of '64. Sonny only had the guitar for a few months at that time. He took me backstage and showed me the all of the innovative features of the guitar, and as a 19 year old kid, I was totally impressed. Sonny was very gracious and friendly and also a great player.

And as a footnote, George got drunk and 'left the building'!

ps. Sorry about the pic size. I'm new at this and don't know how to reduce them for posting.
View user's profile Send private message Send e-mail
Herb Steiner

 

From:
Spicewood TX 78669
Post  Posted 12 Nov 2020 9:46 am    
Reply with quote

Interesting photo showing the 1st generation pickups, soap bar style with the split pole pieces design.

I had #7 for awhile (now in Japan) and the pickups were of the soap bar type and had the pole pieces placed diagonally, with the bass strings poles being closer to the bridge and the treble side closer to the end of the fretboard.
_________________
My rig: Infinity and Telonics.

Son, we live in a world with walls, and those walls have to be guarded by men with steel guitars. Who's gonna do it? You? You, Lt. Weinberg?
View user's profile Send private message Send e-mail Visit poster's website
Donny Hinson

 

From:
Glen Burnie, Md. U.S.A.
Post  Posted 12 Nov 2020 11:48 am    
Reply with quote

Liam Sullins wrote:


Never heard of a "Stereo" steel.


Along with the Emmons Stereo, there was also a Domland Stereo. There may have also been others I'm not aware of.
View user's profile Send private message Send e-mail
Ron Funk

 

From:
Ballwin, Missouri
Post  Posted 6 Dec 2020 8:43 pm    
Reply with quote

That pic looking down between the necks of the Emmons Stereo Steel shows what may have contributed to the short life span of that model.

It appears that the E9th neck had to be removed to get to the electronics of the Stereo model.

Herb Steiner probably knows more......
View user's profile Send private message Send e-mail
Steve Hinson

 

From:
Hendersonville Tn USA
Post  Posted 8 Dec 2020 6:38 am    
Reply with quote

When I worked for GJ,someone gave us(the band)a cassette copy of a reel to reel tape
made at a GJ show in the 60s...Melba Montgomery was singing w/"Postum"and Sonny Curtis was playing steel...

Sonny was playing the Emmons guitar in the picture...what a glorious sound...even on a copy of a copy, the tone of that guitar shone through...bright,but the mid-range evened it out...it was possibly the best I'd ever heard...

I don't know what happened to that tape.

SH
View user's profile Send private message Send e-mail
john buffington

 

From:
Owasso OK - USA
Post  Posted 11 Dec 2020 8:58 pm    
Reply with quote

It was that particular guitar and tone that caught my ear and turned me on to Emmons guitars. Like Steve said - the tone was incredible, it was the total package.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron