| Author |
Topic: Mullen Rollers |
Willis Vanderberg
From:
Petoskey Mi
|
Posted 30 Oct 2020 10:20 am |
|
Are the Rollers for each string gauged on the pre Royal Precision Mullen guitars.
When my bar is resting on the strings, contact is on 1,2and10 strings. The other seven strings are open unless you apply down pressure to The bar.
If the Rollers are gauged I would suspect they were removed from the shaft for cleaning and randomly put back.
Any help appreciated.
Last edited by Willis Vanderberg on 31 Oct 2020 2:26 am; edited 1 time in total |
|
|
 |
Jerry Overstreet
From:
Louisville Ky
|
Posted 30 Oct 2020 10:29 am
|
|
| No, they are not gauged unless they started doing it recently. |
|
|
|
Chris Willingham
From:
Tulsa, Oklahoma
|
Posted 30 Oct 2020 10:34 am
|
|
Jim Palenscar makes sets of gauged rollers. He did two pair for my G2. They're great.
_________________
Fiddle, banjo and steel for Tennessee Jet, Blaine Bailey
2024 MSA Legend XL SD12 D13 8x6 blue burst
2021 MSA Legend XL S10 5X6 brown burst
Beard Josh Swift Sig, the purple one
Lap King Rodeo
Milkman 1/2&1/2 and a bunch of fiddles |
|
|
|
Bobby D. Jones
From:
West Virginia, USA
|
Posted 30 Oct 2020 7:45 pm
|
|
From your description of the problem, The guitar may already have a set of gauged rollers that are out of order.
Measure the grove diameter of each roller, With a dial caliper, Add string diameter to grove diameter, And see if you could move the rollers to make an even line of strings, From string 10 to string 1.
Good Luck and back Happy Steelin. |
|
|
|
Tucker Jackson
From:
Portland, Oregon, USA
|
Posted 31 Oct 2020 9:31 am Re: Mullen Rollers
|
|
| Willis Vanderberg wrote: |
When my bar is resting on the strings, contact is on 1,2and10 strings. The other seven strings are open unless you apply down pressure to The bar.
|
I don't think I've ever had a guitar that wasn't that way. The other 7 strings buzz a little unless you put slight pressure on the bar. I think it's normal -- unless you really have to press down a lot. |
|
|
|
Leo Grassl
From:
Madison TN
|
Posted 31 Oct 2020 4:16 pm
|
|
| If the guitar is a PRP (pre Royal Precision) and the rollers are original, they are not gauged. I’d suggest what another forum member has already proposed, call up Jim Palenscar and see if he’s got a set. Gauged rollers usually solve the problem you are having to some degree. When baring the first fret on most guitars I’ve played, you do need to apply a small amount of downward pressure if you want strings in wide grips to all ring. |
|
|
|
Bob Cox
From:
Buckeye State
|
Posted 1 Nov 2020 6:07 am rollers
|
|
Its very important to keep strings coming back from keys as straight as you can get them. This helps keep rollers free and working like a bearing.
 |
|
|
|
Ron Pruter
From:
Arizona, USA
|
Posted 1 Nov 2020 7:25 pm
|
|
Bob. I understand your thinking BUT, I've also found it advantageous to pull the string to the side, slightly, to mitigate a rattle being caused by a less than perfect fit between the roller and the slot it sits in. RP
_________________
Emmons SKH Le Grande, '73 Fender P/J bass, Tick tack bass, Regal high strung, USA Nashville 112. |
|
|
|
