| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Recording from quilter? Help!
Reply to topic
Author Topic:  Recording from quilter? Help!
Ron Sodos


From:
San Antonio, Texas USA
Post  Posted 14 Oct 2020 4:49 pm    
Reply with quote

I have a need to record my steel to my PC. Im wondering if the signal out (line out) from the back of my quilter brain is enough to record. Or do I need to run it through a preamp before sending to the pc. I have a Podxt if I need to.
Do I need an amplified signal (speaker out) or would that distort?
Appreciate some help

Ron Sodos
San Antonio TX
View user's profile Send private message Send e-mail
K Maul


From:
Hadley, NY/Hobe Sound, FL
Post  Posted 14 Oct 2020 7:00 pm    
Reply with quote

Exactly which amp do you have? I use the XLR out on my Aviator for recording and it is excellent - plenty of gain. I also have the Toneblock 202 which gives you the option of using the XLR out or the cabinet simulated quarter-inch which also doubles as a headphone jack in the front. Either way they’re both very good in a recording situation.
_________________
KEVIN MAUL: Airline, Beard, Clinesmith, Donner, Evans, Excel, Fender, Fluger, GFI, Gibson, Hilton, Ibanez, Justice, K+K, Live Strings, MOYO, National, Oahu, Peterson, Quilter, Rickenbacher, Sho~Bud, Supro, TC, Ultimate, VHT, Williams, X-otic, Yamaha, ZKing.
View user's profile Send private message Send e-mail Visit poster's website
Ron Sodos


From:
San Antonio, Texas USA
Post  Posted 14 Oct 2020 7:19 pm     Stoneblock 201
Reply with quote

I use a toneblock 201 to an effects rack to a black widow speaker. All components. Not sure if the xlr direct out will work that way. I need to get a cable or adapter from xlr to 1/8" male jack to go into my pc sound card.[/i]
View user's profile Send private message Send e-mail
Jack Stoner


From:
Kansas City, MO
Post  Posted 15 Oct 2020 2:29 am    
Reply with quote

The XLR out is at microphone Level which is low for a PC sound card input. If you are using a recording interface unit it will work OK just set the input for mic accordingly.

On a Steelaire, the XLR out is tapped, through resistors to lower level, directly from the speaker out point, according to Pat Quilter. On a TB202 amp the XLR is also mic level.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron