MSA neck selector switch wiring problem

Karl Smakula · From: Nashville, TN

So I recently replaced a broken neck selector switch on my MSA Classic SS and Iâ€™m not exactly getting the desired result. I get signal for both the E9 and C6 necks, but in the middle position, where I anticipated getting signal from both necks, I only got signal from the C6. Iâ€™m gonna guess I did something wrong, but if any of you could help steer me in the right direction, Iâ€™d sure appreciate it. Attached is the photo of the switch in its present state.

Jerry Overstreet · From: Louisville Ky

Maybe this will help. Pickup leads should be on either end of the switch with the jack lead in the center...that's provided it's the proper switch on on on 3 position style.

Nicholas Cox · From: CA

I did this not long ago. Youâ€™ll want to link each pair horizontally. Middle pair will go to the output jack. Looks like a dpdt switch not a spdt.
https://bb.steelguitarforum.com/userpix2020-03/586_on_on_on_switch_wiring_1.jpg
Good luck,
Nick

Karl Smakula · From: Nashville, TN

Thanks guys, I appreciate you taking the time to reply. These were super helpful responses and itâ€™s fixed now.

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: