| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic need tuning peg replacement?
Reply to topic
Author Topic:  need tuning peg replacement?
Stu Schulman


From:
Ulster Park New Yawk (deceased)
Post  Posted 31 Jul 2020 5:02 am    
Reply with quote

I need to find some replacement keys for my lap steel, I dont have a clue of where to look...Help???
_________________
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
View user's profile Send private message Send e-mail
Norman Evans


From:
Tennessee
Post  Posted 31 Jul 2020 5:37 am    
Reply with quote

Maybe here? You also can replace the buttons on those you have.
https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1311.R7.TR12.TRC2.A0.H0.Xkluson.TRS0&_nkw=kluson+tuners+3x3&_sacat=0&LH_TitleDesc=0&_sop=12&_odkw=fender+stringmaster+steel+guitar
View user's profile Send private message Send e-mail
Stu Schulman


From:
Ulster Park New Yawk (deceased)
Post  Posted 31 Jul 2020 6:10 am    
Reply with quote

Norman,Thanks,I found some on Amazon,If they don't fit I'll return em'
_________________
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
View user's profile Send private message Send e-mail
Jack Hanson


From:
San Luis Valley, USA
Post  Posted 31 Jul 2020 7:08 am    
Reply with quote

It's relatively simple to rejuvenate old Kluson Deluxes. I've de-gunked, re-lubed, and re-bottoned dozens of 'em. If you just wanna replace 'em, the Gotoh TK-0700-001 strip tuners are excellent.


Last edited by Jack Hanson on 2 Aug 2020 6:09 am; edited 1 time in total
View user's profile Send private message Send e-mail
Gary S. Lynch

 

From:
Maryland, USA
Post  Posted 31 Jul 2020 4:55 pm    
Reply with quote

Stu,
Whenever possible, I like to keep to keep the original tuners.
I am with Jack on replacement.
I just got a 55 National Dynamic with new white button tuners.
The seller also enclosed the original tuners with no buttons.
$15 at Stew Mac and I am going to put the originals back on with these cream buttons.
55 Klusons pictured below just keep that vintage look IMHO.

Stew Mac has a How to Video.. maybe worth a try.
View user's profile Send private message Send e-mail
Jim Newberry


From:
Seattle, Upper Left America
Post  Posted 1 Aug 2020 4:57 pm    
Reply with quote

Within the past hour, I removed, opened up, re-installed, then broke one on an early 50’s National Chicagoan. Sigh. String 4 was very loose and once I reinstalled it, one of the little tabs snapped when tuning up. I had already had the stewmac site up, chosen a model and all I had to do was hit “Checkout”, so I did.

https://www.stewmac.com/parts-and-hardware/tuning-machines/solid-peghead-guitar-tuning-machines/golden-age-vintage-style-3onplate-tuners.html

It looks like the Gotohs would work, too.
_________________
"The Masher of Touch and Tone"

-1950 Fender Dual Pro 8
-1950's Fender Dual Pro 6
-Clinesmith D8
-Clinesmith 8-string Frypan
-Clinesmith Joaquin
-~1940 National New Yorker
-~1936 Rickenbacher B6
-Homebuilt Amps
View user's profile Send private message
Jerry Overstreet


From:
Louisville Ky
Post  Posted 1 Aug 2020 5:12 pm    
Reply with quote

Stu, here is some info on replacing just the buttons from Stewmac.com. They also sell individual buttons.
https://www.stewmac.com/video-and-ideas/online-resources/guitar-tuning-machine-installation-and-repair-information/replacing-damaged-tuner-knobs.html

I know you don't like to do a lot of repairs, so I would caution you if you are buying replacement machines, be sure and measure the mounting holes carefully.

Also, there are 2 types of strip tuners...one has string posts for steel strings and the other for classical gut string guitars. Try and be sure you get the right type and the proper dimensions.
View user's profile Send private message
Jack Hanson


From:
San Luis Valley, USA
Post  Posted 2 Aug 2020 6:08 am    
Reply with quote

Jerry Overstreet wrote:
Also, there are 2 types of strip tuners...one has string posts for steel strings and the other for classical gut string guitars. Try and be sure you get the right type and the proper dimensions.

This is an excellent point. The correct Gotoh part number for strip tuners for use on solid headstocks is TK-0700-001.
View user's profile Send private message Send e-mail
Jim Newberry


From:
Seattle, Upper Left America
Post  Posted 6 Aug 2020 7:54 pm    
Reply with quote

Jim Newberry wrote:
Within the past hour, I removed, opened up, re-installed, then broke one on an early 50’s National Chicagoan. Sigh. String 4 was very loose and once I reinstalled it, one of the little tabs snapped when tuning up. I had already had the stewmac site up, chosen a model and all I had to do was hit “Checkout”, so I did.

https://www.stewmac.com/parts-and-hardware/tuning-machines/solid-peghead-guitar-tuning-machines/golden-age-vintage-style-3onplate-tuners.html

It looks like the Gotohs would work, too.


I got the Golden Age tuners from StewMac today and they are an exact fit replacement. I used my old screws since the new ones were smaller in diameter. They look great and work very smoothly. It was a fine update.

Also, the buttons are cream instead of white and match the rest of the “plastic” stuff on the guitar perfectly.
_________________
"The Masher of Touch and Tone"

-1950 Fender Dual Pro 8
-1950's Fender Dual Pro 6
-Clinesmith D8
-Clinesmith 8-string Frypan
-Clinesmith Joaquin
-~1940 National New Yorker
-~1936 Rickenbacher B6
-Homebuilt Amps
View user's profile Send private message
Don Barnhill


From:
California, USA
Post  Posted 8 Aug 2020 2:17 am    
Reply with quote

Very helpful post. Thanks Jim!
_________________
Current Lap Steels: 1953 Supro
View user's profile Send private message Send e-mail
Gene Tani


From:
Pac NW
Post  Posted 8 Aug 2020 7:40 am    
Reply with quote

On parts for old/vintage guitars/banjo/mandolins etc I email Elderly, Bob Smakula in WV, Gryphon in Palo Alto CA and a few local and non local stores that are really knowledgeable, here's contacts for first 3

https://www.elderly.com/

https://www.smakula.com/

https://www.gryphonstrings.com/contact-us/

Some of the other places are Fiddlers Green, Denver Folklore, Music Emporium in Mass., the place in Rochester NY Bernunzio's
_________________
- keyless Sonny Jenkins laps stay in tune forever!; Carter PSG
- The secret sauce: polyester sweatpants to buff your picks, cheapo Presonus channel strip for preamp/EQ/compress/limiter, Diet Mountain Dew
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron