| Author |
Topic: Split tuners on a Super Pro? |
Joe Savage
From:
St. Paul, MN
|
Posted 13 May 2006 8:17 am |
|
I recently bought a Super Pro which after a few changes and additions, I really like, except I miss having tunable splits, especially on string 6. I know it's possible to drill and tap in a screw. I'm just not sure about doing it myself and wondered if anybody out there has done this?
Thanks,
Joe Savage |
|
|
 |
Leon Roberts
From:
Tallahassee,FL USA
|
Posted 13 May 2006 11:40 am
|
|
Joe, I have the split tuning feature on all three of my Sho-Buds. I just finished refurbishing a SuperPro and the "splits" were installed. We have A jig for drilling the holes after the changer plate is removed.
I could email you a more detailed photo if you would like.
Leon |
|
|
|
Joe Savage
From:
St. Paul, MN
|
Posted 13 May 2006 11:53 am
|
|
Leon....Please do. I'd like to see the photos.
Thx |
|
|
|
Joe Savage
From:
St. Paul, MN
|
Posted 13 May 2006 2:12 pm
|
|
Well, I took the challenge and drilled and tapped a hole in the appropriate location and it WORKS!!  I now have a tunable split on the 6th string E9! The other split I use alot is on string 5 but that seems to balance out without any alteration. Thanks Jeff, if you see this.
I'd still like to see the photo from Leon, too.
Thanks. |
|
|
|
