| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Weird noises on my Rik B6
Reply to topic
Author Topic:  Weird noises on my Rik B6
Mike Schway

 

From:
Washington, USA
Post  Posted 10 Jun 2020 3:01 pm    
Reply with quote

Sure, there will always be weird noises with my playing, however....

I'm the very proud brand new owner of a '38 Rik Bakelite with metal plates and a tone control on the player side. Wonderful instrument, and I consider myself fortunate to get to play it.

But...

Whenever I apply even a little extra bar pressure AND my right hand is NOT touching either lower plate, I hear the faint sound of frying bacon. (unfortunately, I don't get the aroma of frying bacon) Smile As soon as I either lift the bar or touch either lower plate or the horseshoe with my right hand, the bacon goes away. (waaah!) Hum isn't an issue, even with the single-coil p/u; just the random faint sizzle.

This guitar has strings-through body with an integrally molded bakelite bridge so the strings cannot be grounded...at least not at the bridge end. My educated guess is that my body serves as an antenna for a few microvolts of stray RF noise, which then is conducted close to the pickup coil by the strings. Either grounding myself (by touching the plate) or disconnecting the antenna by lifting the bar gets rid of the noise.

Curious that it gets noisier when I increase bar pressure. Wound strings are worse in this regard.

Anybody else experience this, and should I be wearing a grounding wrist strap? Smile
View user's profile Send private message Send e-mail
Jeff Highland

 

From:
New South Wales, Australia
Post  Posted 10 Jun 2020 3:36 pm    
Reply with quote

Check that there is no magnetic debris on polepieces or magnets and that there is enough clearance from strings to polepieces
_________________
Duesenberg Fairytale
1949 Supro Supreme
1950 National New Yorker
2008 Highland Baritone Weissenborn
2020 Highland New Yorker.
2020 Highland Mohan Veena
2021 Highland Weissencone
View user's profile Send private message Send e-mail
Steven Paris

 

From:
Los Angeles
Post  Posted 10 Jun 2020 3:52 pm    
Reply with quote

Does a grounding wrist strap work?
_________________
Emmons & Peavey
View user's profile Send private message Send e-mail
Mike Schway

 

From:
Washington, USA
Post  Posted 10 Jun 2020 4:42 pm    
Reply with quote

Steven Paris wrote:
Does a grounding wrist strap work?


My actual strap is over at my shop, but grabbing a clip lead connected to the instrument plug's outer barrel (at the guitar end) in my bare hands eliminates the nose. My amp is grounded, so that lead should be at earth ground.


Last edited by Mike Schway on 11 Jun 2020 6:12 am; edited 1 time in total
View user's profile Send private message Send e-mail
Mark Helm


From:
Tennessee, USA
Post  Posted 11 Jun 2020 12:12 am     Demonic Possession?
Reply with quote

If all else fails, you might consult a priest! Laughing
_________________
Remington Steelmaster S8 w/ custom Steeltronics pickup. Vox MV-50 amplifier + an 1940's Oahu cab w/ 8" American Vintage speaker. J. Mascis Fender Squire Jazzmaster, Hofner Club bass, Ibanez AVN4-VMS Artwood Vintage Series Concert Size Acoustic Guitar. 1920s/30s Supertone Hawaiian-themed parlor guitar. Silvertone parlor guitar.
View user's profile Send private message Send e-mail Visit poster's website
Steven Paris

 

From:
Los Angeles
Post  Posted 11 Jun 2020 10:38 am    
Reply with quote

Seems that you need to find a way to ground the strings. Grounding the tuners might work, but it's kinda impractical. The bakelite bridge won't conduct, so that's out. How about a grounded thin metal plate to where the ball end of the strings attach? Just a thought......
_________________
Emmons & Peavey
View user's profile Send private message Send e-mail
Mike Auman


From:
North Texas, USA
Post  Posted 11 Jun 2020 11:37 am    
Reply with quote

Some of us make pretty good antennas. I'm one of those, the same guitar is noisier when I hold it then when anyone else holds it.... so grounding yourself might be simplest, an ESD wrist or ankle strap might do it, and the built-in 1 Meg resistor adds some safety. Mike
_________________
Long-time guitar player, now wrestling with lap steel.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron