| Author |
Topic: Second String Lower on Sierra |
Chris Harvey
From:
California, USA
|
Posted 9 Apr 2020 5:43 pm |
|
| On my string two I can get it to lower the full step but the knee lever alimony hits the leg doing so. Any ideas how to shorten that travel. It’s RKR by the way. |
|
|
 |
Len Amaral
From:
Rehoboth,MA 02769
|
Posted 9 Apr 2020 7:33 pm
|
|
Try raising the nylon barren to the next position on the bell crank. If you get it to tune with the full lower and there is some play left on the rod when not in use, you can adjust the stop on the knee lever so it doesn’t go as far as it did. You may have to adjust this several times but that should get you in the ball park.
_________________
I survived the sixties! |
|
|
|
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 9 Apr 2020 10:36 pm
|
|
| The word alimony got my attention! On the RKR on a Sierra you can move it inward a bit so it won't hit the leg. |
|
|
|
Ian Rae
From:
Redditch, England
|
Posted 10 Apr 2020 12:59 am
|
|
| Jim Palenscar wrote: |
| The word alimony got my attention! |
Sierras come with strings attached.
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs |
|
|
|
Chris Harvey
From:
California, USA
|
Posted 10 Apr 2020 8:27 am
|
|
| Great! I see you can move that knee lever in. I’m just not sure how easy that is. I love this guitar. |
|
|
|
Charley Bond
From:
Inola, OK, USA
|
Posted 11 Apr 2020 8:45 am Moving RKR left....
|
|
I did away with my stock Sierra RKR & added Gears
The gears can be made to work differently, with different ratios.. But are difficult to find on the shelf,.
If you will notice, I could actually go to the far gear, which would require a longer threaded rod & adjusted the RKR lever away from the Leg. I.E., I would have to move the pulls to the nearer shaft, so that may never get done.
_________________
Steel Guitar players are members of a Special Family |
|
|
|
