| Author |
Topic: Volume pedal string |
Ronald Heinzel
From:
Hollister, California, USA
|
Posted 14 Feb 2020 10:17 am |
|
Hate to bother you guys but, where do you get replacement strings for a volume pedal ?
Just had one break in my back up pedal. It’s an Ernie Ball pedal, if that makes a difference.
_________________
Emmons D10 LL, Mullen S-10 Quilter Steelaire Nashville 112, Gretsch White Falcon, USA Strat & Tele, 68 Hummingbird, Taylor 410 CE, AcoustasonicJr. Blues Jr. |
|
|
 |
Larry Dering
From:
Missouri, USA
|
Posted 14 Feb 2020 10:44 am
|
|
| Most music stores stock them. They are a pain to replace so I recommend watching a you tube video on the process. Several online music stores have them too. |
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
|
|
|
Ronald Heinzel
From:
Hollister, California, USA
|
Posted 14 Feb 2020 12:05 pm
|
|
Thanks guys ! The braided line I use to repair my tack is perfect and YouTube showed me the way
_________________
Emmons D10 LL, Mullen S-10 Quilter Steelaire Nashville 112, Gretsch White Falcon, USA Strat & Tele, 68 Hummingbird, Taylor 410 CE, AcoustasonicJr. Blues Jr. |
|
|
|
George Kimery
From:
Limestone, TN, USA
|
Posted 14 Feb 2020 9:07 pm Volume pedal string
|
|
| You must have a string that will not stretch. I have never tried it, but I wonder if round shoe laces would work. Also, I have seen brick masons string that looks like it might work. I have only needed string once in 50 years and I got it from Tom Bradshaw. |
|
|
|
Bill Ferguson
From:
Milton, FL USA
|
Posted 15 Feb 2020 6:32 am
|
|
If any of you need a new volume pedal string, I keep a large roll.
You pay the $1 postage in the lower 48 and I will send you a piece.
_________________
AUTHORIZED George L's, Goodrich, Telonics and Peavey Dealer: I have 2 steels and several amps. My current rig of choice is 1993 Emmons LeGrande w/ 108 pups (Jack Strayhorn built for me), Goodrich OMNI Volume Pedal, George L's cables, Goodrich Baby Bloomer and Peavey Nashville 112. Can't get much sweeter. |
|
|
|
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 15 Feb 2020 6:57 am
|
|
| The Ernie Ball strings are 2 different lengths- one for the Junior and one for the standard. While other strings may work using a bit of ingenuity, I suggest using the original strings as they are looped and designed to fit the pedal. |
|
|
|
