| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Quick connectors to join guitar jack leads to pickup leads?
Reply to topic
Author Topic:  Quick connectors to join guitar jack leads to pickup leads?
John McClung


From:
Olympia WA, USA
Post  Posted 10 Feb 2020 12:07 pm    
Reply with quote

Anyone tell me about an easy, soldering-free way to simply connect the leads from guitar jacks and pickup together? I have solderphobia. Thanks! Links to products would be helpful.
_________________
E9 INSTRUCTION
▪️ If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net
View user's profile Send private message Send e-mail Visit poster's website
Pete Burak

 

From:
Portland, OR USA
Post  Posted 10 Feb 2020 12:27 pm    
Reply with quote

I was going to mount the same spring-loaded wire-holders that are on JBL speakers onto the underside of the cabinet, for this purpose.
As it stands, I changed the pickup in my Sho-Bud recently, and the wires coming from the pickup are connected to the wires coming from the jack by simple Alligator clips from Radio Shack.
View user's profile Send private message Send e-mail
John McClung


From:
Olympia WA, USA
Post  Posted 10 Feb 2020 12:51 pm    
Reply with quote

I just ordered these from Amazon; I'll let you all know how they work out.

I didn't know what gauge the wires I'm dealing with are, just figured these should work! No crimping required, just snap things together from the looks of it.

https://www.amazon.com/gp/product/B07X8TM61B/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
_________________
E9 INSTRUCTION
▪️ If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net


Last edited by John McClung on 10 Feb 2020 12:53 pm; edited 1 time in total
View user's profile Send private message Send e-mail Visit poster's website
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 10 Feb 2020 12:52 pm    
Reply with quote

John,
Go to any auto supply store.
They stock those tubular connectors for different gauge wire.
You just stick the wire in each end and crimp them in place.
Erv
View user's profile Send private message Send e-mail
Dick Sexton


From:
Greenville, Ohio
Post  Posted 10 Feb 2020 1:55 pm     Wiring terminals used for pick-ups...
Reply with quote

These are what I use, they can be cut apart with a sharp knife to make any number of wire terminals. When wired I use double sided tape to affix to any flat surface. Never replace a pick-up I didn't install one. Never had a failure.



View user's profile Send private message Send e-mail Visit poster's website
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 10 Feb 2020 2:03 pm    
Reply with quote

John McClung wrote:
I just ordered these from Amazon; I'll let you all know how they work out.

I didn't know what gauge the wires I'm dealing with are, just figured these should work! No crimping required, just snap things together from the looks of it.

https://www.amazon.com/gp/product/B07X8TM61B/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1


I bought some of these from Home Depot. The wire sizes in my guitar are too small. I just had to rewire my guitar, and went back to soldered connections. New terminal strip and jack.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 55 years and still counting.
View user's profile Send private message Send e-mail
Jim Pitman

 

From:
Waterbury Ctr. VT 05677 USA
Post  Posted 10 Feb 2020 5:31 pm    
Reply with quote

I like spring contact type. You push down vertically with a screw driver to open up the wire entry, push the wire in, then relax the screw driver pressure which clamps the wire.
I'm an EE. Ever since the company I worked for sent me on a tour of the US tightening screw down terminal block screws that had become intermittent, I swore I'd never design them in again. These spring contacts types exert the same pressure forever.
They are modular, that is you buy as many as you need for the amount of wires you need to join end to end, then snap them together. They have screw holes for mounting to a surface.
If you need to join two wires, buy two and one end cap - not sure of the part number for the end cap. If you need to join four wires together Eago also offers 4 pole types which are double the width accordingly.

Check this out[img]
View user's profile Send private message Send e-mail
Bobby D. Jones

 

From:
West Virginia, USA
Post  Posted 10 Feb 2020 8:11 pm    
Reply with quote

Since steels are moved in and out a lot of locations with different environments I would suggest use a electrical anti-corrosive grease on the connections, Just to make sure the connections stay clean.
View user's profile Send private message Send e-mail
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 11 Feb 2020 8:03 am    
Reply with quote

How often do you change pickups that you need a quick connect?
Erv
View user's profile Send private message Send e-mail
John McClung


From:
Olympia WA, USA
Post  Posted 11 Feb 2020 8:34 am    
Reply with quote

I don't ever do it because of the hassle and my solderphobia, Erv. I have a lineup of pickups awaiting a trial, just keep putting it off due to the mental block here. Sad
_________________
E9 INSTRUCTION
▪️ If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net
View user's profile Send private message Send e-mail Visit poster's website
John McClung


From:
Olympia WA, USA
Post  Posted 11 Feb 2020 8:35 am    
Reply with quote

Bobby, thanks for that tip!
_________________
E9 INSTRUCTION
▪️ If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net
View user's profile Send private message Send e-mail Visit poster's website
Jon Zimmerman

 

From:
California, USA
Post  Posted 11 Feb 2020 11:02 am     Anti-corrosion
Reply with quote

Bobby’s advice is well founded, John. It’s called Dialectric Grease. If you are anywhere near the ocean, foggy and salt airs will attack metal bits over time. Only need a teeny amount on metal surfaces, keeps it “clean” where you need a reliable circuit to flow signal, or power.
View user's profile Send private message Send e-mail
Pete Burak

 

From:
Portland, OR USA
Post  Posted 11 Feb 2020 11:30 am    
Reply with quote

There is also a thread around here somewhere where it shows how to change pickups without changing strings.
Basically loosen the strings and hold them up out of the way with a toilet paper roll or something similar.
We used a thing called a Bread-Board in school to make various circuit projects. This is another Radio Shack item that would work for quick connections.
View user's profile Send private message Send e-mail
John McClung


From:
Olympia WA, USA
Post  Posted 11 Feb 2020 6:33 pm    
Reply with quote

Gang, I appreciate all the solid advice! Cool Cool
_________________
E9 INSTRUCTION
▪️ If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net
View user's profile Send private message Send e-mail Visit poster's website
Donny Hinson

 

From:
Glen Burnie, Md. U.S.A.
Post  Posted 12 Feb 2020 6:27 am    
Reply with quote

John McClung wrote:
I don't ever do it because of the hassle and my solderphobia, Erv. I have a lineup of pickups awaiting a trial, just keep putting it off due to the mental block here. Sad


When I first got a guitar with plug-in pickups, I thought "Oh cool, now I can changes pickups in seconds". But after swapping four different pickups in and out, I came to the conclusion that a good amp and it's tone network can do more for the sound than any pickup change. I suppose that if I had only a bass and treble control, the pickup mighty matter. But if I've got an amp with bass-mid-treble and a mid shift, or a graphic EQ, I don't have to worry about the tiny difference another pickup might make.

YMMV
View user's profile Send private message Send e-mail
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 12 Feb 2020 8:31 am    
Reply with quote

Donny,
Yes, I'd rather twist some knobs than go through the hassle of changing pickups. Very Happy
Erv
View user's profile Send private message Send e-mail
Stu Schulman


From:
Ulster Park New Yawk (deceased)
Post  Posted 12 Feb 2020 8:47 am    
Reply with quote

I like my pickups enough to never want change them.
_________________
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
View user's profile Send private message Send e-mail
Jerry Overstreet


From:
Louisville Ky
Post  Posted 12 Feb 2020 9:52 am    
Reply with quote

How about these? Available from your home store electrical dep't or auto parts store. The red ones fit wire size 18-22. Bullet male to female disconnect. Snap and unsnap as required.

I'm with you John. Dealing with those tiny wires, soldering and unsoldering from the switch, wires breaking etc. Let us know how those ones you ordered work out for you.

This type could be permanently crimped to the guitar wiring so that one wouldn't have to deal with all that soldering.

Of course, there must be ample space to hide it all and keep from interfering with the linkage.

I may try this the next time I swap out pickups.

View user's profile Send private message

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron