| Author |
Topic: Excel Superb U-12 2018 Model ***Traded***Please Close*** |
Mike DiAlesandro
From:
Kent, Ohio
|
Posted 9 Feb 2020 5:57 am |
|
Excel Superb U-12 w/B6th lock lever, 8 pedals and 8 knee levers w/ double function on LKR.
Black mica, super lightweight fly guitar, 40# in road case.
Never gigged, basically like new.
Last edited by Mike DiAlesandro on 21 Feb 2020 1:03 pm; edited 4 times in total |
|
|
 |
Johnie King
From:
Tennessee, USA
|
Posted 9 Feb 2020 10:08 am
|
|
| Pm sent |
|
|
|
Pete Burak
From:
Portland, OR USA
|
Posted 9 Feb 2020 12:51 pm
|
|
Just curious what your reason for selling is?
Is this a 25.5" Scale? |
|
|
|
Mike DiAlesandro
From:
Kent, Ohio
|
Posted 9 Feb 2020 1:17 pm
|
|
| Pete Burak wrote: |
Just curious what your reason for selling is?
Is this a 25.5" Scale? |
Pete - I am not a U-12 player, this steel was part of a trade deal. Yes it is 25.5' scale. |
|
|
|
Chuck Spears
From:
Texas, USA
|
Posted 10 Feb 2020 8:47 am
|
|
| How much is it? |
|
|
|
Jack Goodson
From:
new brockton,alabama (deceased)
|
Posted 10 Feb 2020 9:05 am black screws?
|
|
| what doe,s the black screw on the changer do?....thanks jack |
|
|
|
Ian Rae
From:
Redditch, England
|
Posted 10 Feb 2020 9:08 am
|
|
If you follow the link it says $4200
I have one just like it and they're brilliant instruments. Mine cost the same number of pounds so it's not a bad price.
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs |
|
|
|
Pete Burak
From:
Portland, OR USA
|
Posted 10 Feb 2020 9:54 am
|
|
| Jack Goodson wrote: |
| what doe,s the black screw on the changer do?....thanks jack |
You wind the string onto the top post, then you lock it in place using the Black allen screws just below.
Yes, it requires two allen wrenches to change a string. One to hold the tension on the wound string post, the other to lock it in place.
I also use a 1-inch long piece of a straw (I found one just the right size) to hold the string in place right after I slide it though the hole in the post, so I can grab the two allen wrenches. |
|
|
|
Sonny Jenkins
From:
Texas Masonic Retirement Center,,,Arlington Tx
|
Posted 10 Feb 2020 11:21 am
|
|
| So,,,the black screw is kind of a "grub" screw??? |
|
|
|
Pete Burak
From:
Portland, OR USA
|
Posted 10 Feb 2020 11:26 am
|
|
| Sonny Jenkins wrote: |
| So,,,the black screw is kind of a "grub" screw??? |
Its only purpose is to keep the string from unwinding.
In my opinion he should have just put the Black screw where the post is, and lock the string down right there, (kind of like the way a Sierra Session keyless does at the nut). |
|
|
|
Mike DiAlesandro
From:
Kent, Ohio
|
Posted 10 Feb 2020 1:22 pm
|
|
| Chuck Spears wrote: |
| How much is it? |
Chuck,
$4200 shipped, partial trades fine as long as shipping isn't necessary. Lots of interest but still available. |
|
|
|
Al Moss
From:
Kent,OH,USA
|
Posted 11 Feb 2020 9:05 am
|
|
| Mike had graciously hosted me while I had a look at his Excel just a few days ago. Like Mike, the Uni-tuning (Looney Tuning, sorry Uni cats, couldn't resist indulging in the lowest form of humor --- the cheap pun) ...the Universal tuning stops me dead in my tracks. But, it is a beautiful instrument and you'd have to be told that it isn't a brand new instrument to get hip to that. It appears to me to be in showroom, pristine condition and awaiting just the right player to enjoy it's musicality. Cheers |
|
|
|
Mike DiAlesandro
From:
Kent, Ohio
|
Posted 13 Feb 2020 5:55 am
|
|
Al - Thanks for the kind words, it was nice hanging out!
I changed the 2nd string change so that it is standard E9th, with the open string being tuned to D#, and the RKR lowering to D/C# with the half stop set by the start of the raise on the 9th string (B-D). Seems to work out well.
If you wanted to have the C# on the 2nd string in B6th mode without using the RKR lever, you could get an extra bellcrank, rod and tuning nut from Mitsuo and add the 2nd string lower to the dedicated cross-shaft on the B6th locking lever.
Best of both worlds
 |
|
|
|
Mike DiAlesandro
From:
Kent, Ohio
|
Posted 14 Feb 2020 2:34 pm
|
|
TTT |
|
|
|
Steven Black
From:
Gahanna, Ohio, USA
|
Posted 15 Feb 2020 7:07 am Zumsteel
|
|
| Hello Mike, where in Ohio are you located, I am from Columbus Ohio, and do you still have that Zum D10? |
|
|
|
Mike DiAlesandro
From:
Kent, Ohio
|
Posted 16 Feb 2020 5:17 am Local pickup
|
|
| Come on up to Kent and pick this fine steel up for $3850 no haggle price. Partial trades considered on 10 string pedal steels. |
|
|
|
Richard Fiedler
From:
Washington, USA
|
Posted 17 Feb 2020 3:43 pm I saw this on Reverb for a few hours - still Avail?
|
|
Ya, this guitar is awesome...still available?  |
|
|
|
Mike DiAlesandro
From:
Kent, Ohio
|
Posted 21 Feb 2020 1:02 pm
|
|
| Traded, thanks for the interest. |
|
|
|
