| Author |
Topic: Profex II how do ya? |
Patrick Huey
From:
Nacogdoches, Texas, USA
|
Posted 7 Feb 2020 2:47 am |
|
How do you re-install presets using the Peavey cache card? Somehow i’ve lost one of my favorite custom settings. It now has another setting I’ve already got on there elsewhere in its place, but I have everything backed up on card just don’t know how to use it.
Thanks all!
_________________
Pre RP Mullen D10 8/7, Zum 3/4, Carter S-10 3/4, previous Cougar SD-10 3/4 & GFI S-10 3/4, Fender Steel King, 2 Peavey Session 500's, Peavey Nashville 400, Boss DD-3, Profex-II, Hilton Digital Sustain, '88 Les Paul Custom,Epiphone MBIBG J-45, Fender Strat & Tele's, Takamine acoustics, Marshall amps, Boss effects, Ibanez Tube Screamer, and it all started with an old cranky worn out Kay acoustic you could slide a Mack truck between the strings and fretboard on!! |
|
|
 |
Ken Fox
From:
Nashville GA USA
|
Posted 7 Feb 2020 11:35 am
|
|
To save or load the presets:
-SAVING ALL PROFEX USER SETTINGS TO THE CARD:
-The cursor will be blinking under the letter “S†in SAVE, this indicates that the unit is ready to Save settings to the cache card from Profex user memory. If the cursor is not there, use the LEFT ARROW button on the face of the Profex 2 to move the cursor to this location. Press the Store/Exec button on the face of the Profex 2. If a message come up that says:
“CARTRIDGE WRITE PROTECTEDâ€
then a small switch on the back left edge of the card needs to be toggled. Move the switch on the card to the right and again hit the Store/Exec button. A message will display:
“CARTRIDGE SAVE COMPLETE.â€
Hit the Play button on the face of the Profex 2. You may now toggle up and down through the settings on the Profex 2! (Be sure your cursor is located under the left-most character at this point, move it there using the LEFT ARROW button, on the face of the Profex 2). You have successfully saved your user settings to the cartridge and overwritten any previous information on it.
-LOADING ALL SETTINGS FROM THE CARD TO THE USER MEMORY OF THE PROFEX 2:
-Insert card into Profex card slot with the “metal edge†end down (the metal edge covers the P.C. board
connectors on the card), card will snap into place
-Press the GLOBAL button until the following screen appears:
SAVE User>Cart [CART}
Save Load In >EXEC<
-Proceed as above, but move the cursor under the “L†in LOAD (use the RIGHT ARROW button on the
face of the Profex 2 to move the cursor to this location. Press the Store/Exec button on the face of the
Profex 2. A message will come up that says:
cartridge load complete
Hit the Play button on the face of the Profex 2. You may now toggle up and down through the newly
loaded settings on the Profex 2! Be sure your cursor is located under the left-most character at this point,
move it there using the LEFT ARROW button, on the face of the Profex 2. You have successfully loaded
your cartridge settings to the user memory of the Profex 2 and have overwritten any previous information
that was in the user memory of the Profex 2.
Last edited by Ken Fox on 7 Feb 2020 11:38 am; edited 1 time in total |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 7 Feb 2020 11:36 am
|
|
| Use second set of directions to load to the Profex |
|
|
|
Patrick Huey
From:
Nacogdoches, Texas, USA
|
Posted 7 Feb 2020 7:28 pm
|
|
| Ken Fox wrote: |
| Use second set of directions to load to the Profex |
Awesome! Thanks, Ken!
_________________
Pre RP Mullen D10 8/7, Zum 3/4, Carter S-10 3/4, previous Cougar SD-10 3/4 & GFI S-10 3/4, Fender Steel King, 2 Peavey Session 500's, Peavey Nashville 400, Boss DD-3, Profex-II, Hilton Digital Sustain, '88 Les Paul Custom,Epiphone MBIBG J-45, Fender Strat & Tele's, Takamine acoustics, Marshall amps, Boss effects, Ibanez Tube Screamer, and it all started with an old cranky worn out Kay acoustic you could slide a Mack truck between the strings and fretboard on!! |
|
|
|
Patrick Huey
From:
Nacogdoches, Texas, USA
|
Posted 28 Feb 2020 2:08 am
|
|
| Ken Fox wrote: |
| Use second set of directions to load to the Profex |
Ken thank you very much I just now got around to doing this. Piece of 🎂!
Thanks so much!
_________________
Pre RP Mullen D10 8/7, Zum 3/4, Carter S-10 3/4, previous Cougar SD-10 3/4 & GFI S-10 3/4, Fender Steel King, 2 Peavey Session 500's, Peavey Nashville 400, Boss DD-3, Profex-II, Hilton Digital Sustain, '88 Les Paul Custom,Epiphone MBIBG J-45, Fender Strat & Tele's, Takamine acoustics, Marshall amps, Boss effects, Ibanez Tube Screamer, and it all started with an old cranky worn out Kay acoustic you could slide a Mack truck between the strings and fretboard on!! |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 28 Feb 2020 5:21 am
|
|
| Glad to help out |
|
|
|
