| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic If E9 + pedals = A6, why not get an S10?
Goto page Previous  1, 2
Reply to topic
Author Topic:  If E9 + pedals = A6, why not get an S10?
Herb Steiner


From:
Briarcliff TX 78669, pop. 2,064
Post  Posted 23 Aug 2009 5:54 pm    
Reply with quote

Ed
I guess there are some similarities, but I really don't conceive of them as such. Just the way my brain codifies the pedal and its usages.
_________________
My rig: Infinity and Telonics.

Son, we live in a world with walls, and those walls have to be guarded by men with steel guitars. Who's gonna do it? You? You, Lt. Weinberg?
View user's profile Send private message Send e-mail Visit poster's website
Edward Meisse

 

From:
Santa Rosa, California, USA
Post  Posted 23 Aug 2009 6:16 pm    
Reply with quote

John Allison wrote:
James, it seems to me that at the heart of your question is the concept of the A6(C6) non-pedal tuning for lap or console steel.

If you're used to C6 or A6 lap steel you can find it very easy to go A/B down and enter familiar territory. I even had my E9 (strings 9 and 10) tuned to give me a full A6 tuning across 7 strings. The shortcoming is that it turns a pedal steel into a lap steel - there aren't too many ways to enhance that tuning with other pedals or levers - the E-Eb lever for a flat 5 is a good one, though.

With the C6 Pedal steel (as well as the 12-string Universal), there's an incredible range of possibilities for harmonized chord melodies and complex extended chords for comping. Even as a beginner on C6 pedal I've been able to find my way into jazz and swing chord progressions that I simply couldn't begin to find on non-pedal.


Well, I wouldn't go as far as to say, "Me too," here. But I know what you probably mean to say. With the pedal guitar I can, as Jeff Newman used to say, "Grab a handful of strings," on the pedal C6 as opposed to picking two or three to more or less express the heart of the chord. Now if I could only get my stool adjusted to sit comfortably behind this thing.....
_________________
Amor vincit omnia
View user's profile Send private message Send e-mail
Dan Tyack

 

From:
Olympia, WA USA
Post  Posted 24 Aug 2009 1:37 pm     I know this is off topic, but
Reply with quote

Killer tone, Herb.

As usual....
View user's profile Send private message Send e-mail Visit poster's website
b0b


From:
Cloverdale, CA, USA
Post  Posted 24 Aug 2009 1:47 pm     Re: I know this is off topic, but
Reply with quote

Dan Tyack wrote:
Killer tone, Herb.

As usual....

Yes it is. Is that your Fessenden?
_________________
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
View user's profile Send private message Visit poster's website
Herb Steiner


From:
Briarcliff TX 78669, pop. 2,064
Post  Posted 24 Aug 2009 1:50 pm    
Reply with quote

Dan, b0b
Thanks for the comps. I cut the samples on 1965 Emmons wraparound. Just an old guitar I have laying around the house here... nothing special.
_________________
My rig: Infinity and Telonics.

Son, we live in a world with walls, and those walls have to be guarded by men with steel guitars. Who's gonna do it? You? You, Lt. Weinberg?
View user's profile Send private message Send e-mail Visit poster's website
Dan Tyack

 

From:
Olympia, WA USA
Post  Posted 24 Aug 2009 4:53 pm    
Reply with quote

Herb Steiner wrote:
Dan, b0b
Thanks for the comps. I cut the samples on 1965 Emmons wraparound. Just an old guitar I have laying around the house here... nothing special.


"What, this old rag? Smile"

I knew it was some kind of obsolete POS that Herb likes to keep around.
View user's profile Send private message Send e-mail Visit poster's website
Herb Steiner


From:
Briarcliff TX 78669, pop. 2,064
Post  Posted 24 Aug 2009 5:20 pm    
Reply with quote

Dan Tyack wrote:
"What, this old rag? "


Hey, good title for an instrumental!
_________________
My rig: Infinity and Telonics.

Son, we live in a world with walls, and those walls have to be guarded by men with steel guitars. Who's gonna do it? You? You, Lt. Weinberg?
View user's profile Send private message Send e-mail Visit poster's website
Robert Harper

 

From:
Alabama, USA
Post  Posted 24 Aug 2009 5:30 pm     The Bass The Bass
Reply with quote

If I played the C6 I would miss the boom of the 10th string That is a note to remeber.
_________________
"Oh what a tangled web we weave when we first begin to deceive" Someone Famous
View user's profile Send private message Send e-mail
Daniel Morris


From:
Westlake, Ohio, USA
Post  Posted 11 Nov 2019 6:57 pm    
Reply with quote

Thanks for the insight, Herb.
I'm not quite adept enough to enumerate everything the typical P4 offers, but your examples reinforce why I think it's a keeper (even if I'm strictly a U12 player.)
_________________
1979 MSA U12 Pedal Steel
1982 Kline U12 Pedal steel
2019 Sierra U12 Pedal Steel
2011 Bear Creek MK Weissenborn
Milkman 40W Mini amp w/Telonics 15" speaker.
Dr. Z Surgical Steel w/TT 15" speaker.
Frenzel MB-50 head.
Spaceman, Empress, Eventide, Pigtronix.
View user's profile Send private message Send e-mail
David Weisenthal

 

From:
Arizona, USA
Post  Posted 11 Nov 2019 8:10 pm    
Reply with quote

This is an interesting post that I hadnt seen till Daniel woke it up again. I was wondering about this recently since I acquired a D10 recently and am slowly getting it set up. I found an old B.E. C6 course on ebay which I hope will be a good primer for a new C6 neck player like me. Does this look familiar to any of you guys? From 1983 it says. Great close up of his picks too. The Jeffran stuff was so well done.



View user's profile Send private message Send e-mail
Ian Rae


From:
Redditch, England
Post  Posted 12 Nov 2019 2:37 am    
Reply with quote

It's a weird coincidence that this thread has been revived and has veered towards a discussion of P4 right when the same topic is being discussed on another thread. Or maybe it's deliberate. Or maybe it's Carl Jung's "collective subconscious" in action. May be I should do a poll to find out.

Anyway, to deal with the first question first - some time ago I wondered about building an E9/A6 uni but although it's an obvious and attractive idea, I couldn't figure how to make it work in practice and I accepted that B6 is favoured for a reason.

As for P4, Herb's examples confirm what I suspected - that it really comes into its own in the minor mode. I play uni and there is the problem with there not being enough changes available with 3 up, 3 down - but Rick Schmidt's idea of a half-stop on the A-Bb lever is a light-bulb, nay, a searchlight moment for me! I know that a lot of folks dislike half-stops but I'm fine with them. I shall give it a go when I have time to do the work Idea
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
View user's profile Send private message Send e-mail Visit poster's website
John Spaulding


From:
Wisconsin, USA
Post  Posted 12 Nov 2019 6:21 am    
Reply with quote

David Weisenthal wrote:
This is an interesting post that I hadnt seen till Daniel woke it up again. I was wondering about this recently since I acquired a D10 recently and am slowly getting it set up. I found an old B.E. C6 course on ebay which I hope will be a good primer for a new C6 neck player like me. Does this look familiar to any of you guys? From 1983 it says. Great close up of his picks too. The Jeffran stuff was so well done.


All of the Buddy Emmons lessons are great.

You might want to check out Paul Franklin's C6 Essentials course, too.

This video from Paul's recent seminar in Texas is a nice intro to how Paul teaches the neck: The C6 Tuning

Here's more info on the C6 Essentials Course: C6 Essentials
View user's profile Send private message Send e-mail
David Weisenthal

 

From:
Arizona, USA
Post  Posted 12 Nov 2019 9:37 am    
Reply with quote

Thanks John I'll check it out.
View user's profile Send private message Send e-mail
Greg Cutshaw


From:
Corry, PA, USA
Post  Posted 12 Nov 2019 11:54 am    
Reply with quote

A couple more simple examples of C6 pedal 4 usage:

Example 1:

http://www.gregcutshaw.com/Tab/Tab65.wma

Tab:
http://www.gregcutshaw.com/Tab/Tab65.pdf

Example 2:

http://www.gregcutshaw.com/Tab/Tab612.wma

Tab:
http://www.gregcutshaw.com/Tab/Tab612.pdf
View user's profile Send private message Send e-mail Visit poster's website Yahoo Messenger
Frank Freniere


From:
The First Coast
Post  Posted 12 Nov 2019 1:24 pm    
Reply with quote

Speaking of S-10s, I’ve been messing around with FoBro ebb’s E9 tab of “Misty” in Eb. Some really cool sounds there - not your usual AB pedal mashup.
View user's profile Send private message
Zachary Smith

 

From:
New Jersey, USA
Post  Posted 15 Nov 2019 5:59 pm    
Reply with quote

David Weisenthal wrote:
This is an interesting post that I hadnt seen till Daniel woke it up again. I was wondering about this recently since I acquired a D10 recently and am slowly getting it set up. I found an old B.E. C6 course on ebay which I hope will be a good primer for a new C6 neck player like me. Does this look familiar to any of you guys? From 1983 it says. Great close up of his picks too. The Jeffran stuff was so well done.





That is on his website with audio clips

http://www.buddyemmons.com/BluesToUse.htm
View user's profile Send private message Send e-mail
Greg Lambert

 

From:
Illinois, USA
Post  Posted 15 Nov 2019 7:46 pm    
Reply with quote

Without all the technical raises and lowers of strings , if you want to fatten up a song do it on the C6th.
View user's profile Send private message Send e-mail
David Weisenthal

 

From:
Arizona, USA
Post  Posted 15 Nov 2019 8:07 pm    
Reply with quote

Thanks for the weblink Zachary. I needed the audio for these. I'm ebarrased to admit Ive never been on big E's site. Embarassed
View user's profile Send private message Send e-mail
Herb Steiner


From:
Briarcliff TX 78669, pop. 2,064
Post  Posted 17 Nov 2019 9:30 am    
Reply with quote

Greg Lambert wrote:
Without all the technical raises and lowers of strings , if you want to fatten up a song do it on the C6th.


This...
_________________
My rig: Infinity and Telonics.

Son, we live in a world with walls, and those walls have to be guarded by men with steel guitars. Who's gonna do it? You? You, Lt. Weinberg?
View user's profile Send private message Send e-mail Visit poster's website
Fred Treece


From:
California, USA
Post  Posted 17 Nov 2019 10:35 am    
Reply with quote

Tony Prior wrote:
question:

If E9 + pedals = A6, why not get an S10?

short answer:

Probably because now you are at the 6th tuning with pedals IN and restricted.

The C6 neck is with NO Pedals and offers a variety of stuff to add.

This sums up the OP’s concern.

I would frame the question as E9 + E lower lever = B6, since you have the low root on string 10. The answer would be very similar, though you are not quite as restricted in terms of pedal and lever options.

Others have made the point that certain C6 chord voicings can be done on E9, but the grips are comparatively awkward. That seems pretty obvious, even to someone like me who doesn’t play C6. Many 4- and 5-note C6 chord voicings are simply not possible on E9, even if the chord partials technically are.

There has been little mention of Extended E9. The two lower strings and a 4x5 configuration should certainly get you further into C6 territory if you wanted to go there. At least, that’s what I’m planning...
View user's profile Send private message Send e-mail
Greg Derksen

 

From:
Alberta, Canada
Post  Posted 17 Nov 2019 5:11 pm    
Reply with quote

Herb Steiner wrote:
Dan, b0b
Thanks for the comps. I cut the samples on 1965 Emmons wraparound. Just an old guitar I have laying around the house here... nothing special.

Off topic but.....
That guitar sounds a lot like Jim Loessbergs to my ears,
Thx for posting the clips and samples.

Greg
View user's profile Send private message Send e-mail
Ian Rae


From:
Redditch, England
Post  Posted 18 Nov 2019 1:50 am    
Reply with quote

Tony Prior wrote:
question:

If E9 + pedals = A6, why not get an S10?

short answer:

Probably because now you are at the 6th tuning with pedals IN and restricted.

The C6 neck is with NO Pedals and offers a variety of stuff to add.

According to the Winston Bible, Ernie Hagar's A & B worked in reverse, so he would have been unrestricted in A6. Don't think I'll change, though.
Is it worth pointing out that B6 is also an E9 tuning but with a sharp 7th instead of a flat one?
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron