| Author |
Topic: Endplates |
Bill Hoskins
From:
Sun City, Arizona, USA
|
Posted 18 Oct 2019 1:38 pm |
|
I would like to convert my pre-85 MSA Classic XL S-10 to a SD-10.
I am looking for SD-10 or D-10 endplates that will work for this project. I have to build a new body so I don't necessarily need MSA endplates if the cut out can be machined to fit. The MSA cut out for the pull rods is 4 1/4 x 1 1/2.
Thanks for any help or suggestions anyone might have. |
|
|
 |
Paul Norman
From:
Washington, North Carolina, USA
|
Posted 18 Oct 2019 3:04 pm
|
|
I`ve got some. Email me a tel no. and I will send you some pictures
Paul Norman |
|
|
|
Bill Hoskins
From:
Sun City, Arizona, USA
|
Posted 19 Oct 2019 10:41 am Endplates
|
|
| Thanks Paul. Email sent. |
|
|
|
Paul Norman
From:
Washington, North Carolina, USA
|
Posted 19 Oct 2019 3:21 pm
|
|
| Do not email me thru the forum. I will not get the info. Call me. or send by your email. |
|
|
|
